Hello Ian
On 06-Nov-99, you wrote:
> Adrian Blackshall was saying..
>
>> stable but one thing puzzles me with my system. I have a Pace 56K modem,
>> a Hypercom 3+ card and use the hypercom30Z.device but only get a
>> connection speed of 31200/ARQ which I believe to be the default speed of
>> the AMIGAs
>
> When I first got my Pace56K external modem it did exactly that. In my
> case it was because the modem firmware was K56Flex type instead of V90
> which the ISP didn't like much, so it always dropped back to non-56K
> modes.
>
> You can check which version of firmware you have by using a terminal
> program and typing "ati4" it should return a version string. Less than
> V2.00 is K56 only I think. Pace have upgrades to the firmware on their
> website in either K56 or V90 flavour, BUT before I get everyone
> shouting, be very aware that you need a few minutes to upgrade your
> modem and if you get a power cut or crash in that time you will very
> likely wreck your modem.... :-o Also be careful to follow the
> instructions *exactly.* Mind you, I upgraded mine quite happily with
> no problems whatsoever.
>
> Hope that helps,
>
> Ian
> ===
I followed your instructions Ian and it all worked a treat, THANKS. I'm now
connected at 50667 and I'm choked to think I've been missing these speeds
for over a year :(
Yours exceedingly gratefully - Momodem
ps - thanks also to Patrick Ford
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
http://www.homeusers.prestel.co.uk/biggy/
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
