Samuel Byford said,
> I tried to set up a LAN connection via Genesis and the parnet cable but I
> cant seem to get it to work.
> I have the 1200 set to 192.168.0.1 and the 4000 to 192.168.0.2 and the
> NetMask to 255.255.255.0
> Im unsure whether the sana-II device should be set to PPP or to sana-II and
> parnet.device. However neither version works.
Grab spar.device from Aminet. It's the only one I've found that works
with a ParNET cable. It's a bit flakey though. MagPLIP is more
reliable, but it uses a different cable.
> The thing is I want to run VVA/VNC as shown in AA last issue.
> Now, if I do need to use the serial lead, is it possible to run a lead from
> the 9 pin female connector that dangles from the modem (which is connected by
> the 25 pin male lead) to the 25 pin connector on my 4000's I/O extender ?????
No, but you can use the second serial port of the IOeXtender.
Neil
--
Neil Bothwick - New Media Editor, Amiga Active Magazine
Connected via Wirenet - http://www.wire.net.uk
The UK's first Amiga-only internet access provider
--
OPERATOR ERROR: Nyah, Nyah, Nyah, Nyah, Nyah!
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
