From: Jiri Pirko <j...@mellanox.com>
So far, there has been an mlx4-specific sysfs file allowing user to
change port type to either Ethernet of InfiniBand. This is very
inconvenient.
Allow to expose the same ability to set port type in a generic way
using devlink interface.
Signed-off-by: Jiri Pirko <j...@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/main.c | 86 +++++++++++++++++++++++--------
1 file changed, 65 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c
b/drivers/net/ethernet/mellanox/mlx4/main.c
index a5f54a5..4bac714 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1052,36 +1052,20 @@ static ssize_t show_port_type(struct device *dev,
return strlen(buf);
}
-static ssize_t set_port_type(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
+static int __set_port_type(struct mlx4_port_info *info,
+ enum mlx4_port_type port_type)
{
- struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
- port_attr);
struct mlx4_dev *mdev = info->dev;
struct mlx4_priv *priv = mlx4_priv(mdev);
enum mlx4_port_type types[MLX4_MAX_PORTS];
enum mlx4_port_type new_types[MLX4_MAX_PORTS];
- static DEFINE_MUTEX(set_port_type_mutex);
int i;
int err = 0;
- mutex_lock(&set_port_type_mutex);
-
- if (!strcmp(buf, "ib\n"))
- info->tmp_type = MLX4_PORT_TYPE_IB;
- else if (!strcmp(buf, "eth\n"))
- info->tmp_type = MLX4_PORT_TYPE_ETH;
- else if (!strcmp(buf, "auto\n"))
- info->tmp_type = MLX4_PORT_TYPE_AUTO;
- else {
- mlx4_err(mdev, "%s is not supported port type\n", buf);
- err = -EINVAL;
- goto err_out;
- }
-
mlx4_stop_sense(mdev);
mutex_lock(&priv->port_mutex);
+ info->tmp_type = port_type;
+
/* Possible type is always the one that was delivered */
mdev->caps.possible_type[info->port] = info->tmp_type;
@@ -1123,6 +1107,37 @@ static ssize_t set_port_type(struct device *dev,
out:
mlx4_start_sense(mdev);
mutex_unlock(&priv->port_mutex);
+
+ return err;
+}
+
+static ssize_t set_port_type(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info,
+ port_attr);
+ struct mlx4_dev *mdev = info->dev;
+ enum mlx4_port_type port_type;
+ static DEFINE_MUTEX(set_port_type_mutex);
+ int err;
+
+ mutex_lock(&set_port_type_mutex);
+
+ if (!strcmp(buf, "ib\n")) {
+ port_type = MLX4_PORT_TYPE_IB;
+ } else if (!strcmp(buf, "eth\n")) {
+ port_type = MLX4_PORT_TYPE_ETH;
+ } else if (!strcmp(buf, "auto\n")) {
+ port_type = MLX4_PORT_TYPE_AUTO;
+ } else {
+ mlx4_err(mdev, "%s is not supported port type\n", buf);
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ err = __set_port_type(info, port_type);
+
err_out:
mutex_unlock(&set_port_type_mutex);
@@ -3651,6 +3666,35 @@ err_disable_pdev:
return err;
}
+static int mlx4_devlink_port_type_set(struct devlink_port *devlink_port,
+ enum devlink_port_type port_type)
+{
+ struct mlx4_port_info *info = container_of(devlink_port,
+ struct mlx4_port_info,
+ devlink_port);
+ enum mlx4_port_type mlx4_port_type;
+
+ switch (port_type) {
+ case DEVLINK_PORT_TYPE_AUTO:
+ mlx4_port_type = MLX4_PORT_TYPE_AUTO;
+ break;
+ case DEVLINK_PORT_TYPE_ETH:
+ mlx4_port_type = MLX4_PORT_TYPE_ETH;
+ break;
+ case DEVLINK_PORT_TYPE_IB:
+ mlx4_port_type = MLX4_PORT_TYPE_IB;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return __set_port_type(info, mlx4_port_type);
+}
+
+static const struct devlink_ops mlx4_devlink_ops = {
+ .port_type_set = mlx4_devlink_port_type_set,
+};
+
static int mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct devlink *devlink;
@@ -3660,7 +3704,7 @@ static int mlx4_init_one(struct pci_dev *pdev, const
struct pci_device_id *id)
printk_once(KERN_INFO "%s", mlx4_version);
- devlink = devlink_alloc(NULL, sizeof(*priv));
+ devlink = devlink_alloc(&mlx4_devlink_ops, sizeof(*priv));
if (!devlink)
return -ENOMEM;
priv = devlink_priv(devlink);
--
1.9.3
