> On Jan 10, 2018, at 12:58 AM, Einar Nilsen-Nygaard (einarnn) > <eina...@cisco.com> wrote: > > Mahesh, > > Two things: > > First, I see that you have still left in the “icmp-off” action. This was > something both Kristian and I recommended removing, and I also discussed this > with Sonal at the end of last year and she agreed that it should probably be > removed since it seems at this point (absent anyone pointing out other > implementations) to be a Cisco IOS-XR-specific feature that should probably > be dealt with via a vendor augmentation initially. Can we remove this?
You are right. It was discussed, but more to understand why we needed it. Before we remove it, let me clarify why we need it, and if after that the consensus is still to remove it, or move it to a Cisco specific augmentation, we can do it. The idea behind having the leaf is for routers to setup a rule to accept ICMP messages, allow the router to process the message, but suggest that a response may be suppressed. That way one can have rules to receive and process ICMP messages like “destination unreachable” or “fragmentation required” that are important for routers/hosts, but prevent rogue machines from discovering machines in a sweeping ping. > > Second, I would really like the contributors who wish to maintain the > separate ACL attachment interface list with interface references to lay out > how direct interface attachment prevents ACLs being used with other > attachment points. As I pointed out, direct interface attachment does not > remove any flexibility at all for other future attachment points. While I’m > not intrinsically opposed to a separate list with interface refs, I just want > to understand the rationale as the majority of switches and routers, as far > as I am aware, typically attach ACLs directly to interfaces, meaning that the > pattern is well-understood by typical users of this model. I think the first issue in setting up alternate attachment point is, how would you do setup the alternate attachment point as a choice between it and attaching it to an interface under an augmentation. Secondly, if the ACLs are used with multiple NI, each of them referring to the global set of ietf-interfaces shared by all the instances, which the schema mount draft outlines here <https://tools.ietf.org/html/draft-ietf-netmod-schema-mount-06#section-4>, it implies that you will need a reference to the interfaces. Thanks. > > Cheers, > > Einar > > >> On 10 Jan 2018, at 03:08, Mahesh Jethanandani <mjethanand...@gmail.com >> <mailto:mjethanand...@gmail.com>> wrote: >> >> I have pulled in the changes as they relate to: >> >> - moving “interface-acl” under the container “attachment-points” making it >> local to that container. >> - reverting “acl-type” to “type” >> - removed “interface-all-aggregate” feature >> - simplified source port and destination port definition >> >> The pull request for the changes can be found here. >> >> https://github.com/netmod-wg/acl-model/pull/20 >> <https://github.com/netmod-wg/acl-model/pull/20> >> >> After discussing with some of the original contributors, decided not to >> include the change as it relates to augmenting ietf-interfaces. We did not >> find that the change had a particular advantage over the current >> implementation. Even if we do not completely understand how ACLs might be >> attached “globally” or on something that is not an interface, having the >> flexibility to attach them to other attachment points is important. Keeping >> it as interface-ref gives us that flexibility. >> >> Cheers. >> >>> On Dec 18, 2017, at 4:31 AM, Eliot Lear <l...@cisco.com >>> <mailto:l...@cisco.com>> wrote: >>> >>> So long as nobody expects an interface construct in a MUD file, I'm happy. >>> >>> On 17.12.17 15:34, Einar Nilsen-Nygaard (einarnn) wrote: >>>> Eliot, >>>> >>>> Nothing can force an implementation to have to implement either the >>>> ietf-interfaces model or the augmentation in the ietf-access-control-list >>>> model. I appreciate your desire for modularity and cohesiveness, but I >>>> would resist #1, because I feel that the majority of users will be >>>> targeting interface-based attachment over time. I’ve adde back in use of >>>> the “interface-attachment” feature (which I took out as part of >>>> refactoring interface attachment). Part of: >>>> >>>> https://github.com/netmod-wg/acl-model/pull/21 >>>> <https://github.com/netmod-wg/acl-model/pull/21> >>>> >>>> The augments part of the tree now looks like: >>>> >>>> augment /if:interfaces/if:interface: >>>> +--rw acls {interface-attachment}? >>>> +--rw ingress >>>> | +--rw acl-sets >>>> | +--rw acl-set* [name] >>>> | +--rw name -> /access-lists/acl/name >>>> | +--rw type? -> /access-lists/acl/type >>>> | +--ro ace-statistics* [name] {interface-stats}? >>>> | +--ro name -> >>>> /access-lists/acl/aces/ace/name >>>> | +--ro matched-packets? yang:counter64 >>>> | +--ro matched-octets? yang:counter64 >>>> +--rw egress >>>> +--rw acl-sets >>>> +--rw acl-set* [name] >>>> +--rw name -> /access-lists/acl/name >>>> +--rw type? -> /access-lists/acl/type >>>> +--ro ace-statistics* [name] {interface-stats}? >>>> +--ro name -> >>>> /access-lists/acl/aces/ace/name >>>> +--ro matched-packets? yang:counter64 >>>> +--ro matched-octets? yang:counter64 >>>> >>>> Cheers, >>>> >>>> Einar >>>> >>>> >>>>> On 17 Dec 2017, at 11:29, Eliot Lear <l...@cisco.com >>>>> <mailto:l...@cisco.com>> wrote: >>>>> >>>>> Einar, >>>>> >>>>> I think this change is fine, with one exception. I would rather the >>>>> augment to the interface not be required for implementations that don't >>>>> actually have interfaces. I understand that there may be two ways to go >>>>> about this: >>>>> >>>>> Separate out the augment into a separate module (same doc is fine); or >>>>> Somehow "feature-ize" the augment. >>>>> I don't know how to do (2) but if you do, that's okay by me. >>>>> >>>>> Eliot >>>>> >>>>> On 16.12.17 14:19, Einar Nilsen-Nygaard (einarnn) wrote: >>>>>> All, >>>>>> >>>>>> After a series of discussions on- and off-list, I have a candidate PR >>>>>> that includes the changes in the PR Mahesh sent out plus some more >>>>>> edits. Please see consolidated PR here: >>>>>> >>>>>> https://github.com/netmod-wg/acl-model/pull/21 >>>>>> <https://github.com/netmod-wg/acl-model/pull/21> >>>>>> >>>>>> Main changes in addition to Mahesh’s PR are: >>>>>> >>>>>> Moved interface attachment to be via an interface augmentation. >>>>>> Restructured port matches slightly under both IPv4 and IPv6 containers. >>>>>> Removed unnecessary identity 'interface-acl-aggregate’. >>>>>> Removed action ‘icmp-off’, can be augmented later. >>>>>> >>>>>> For reference, here is the current YANG tree plus “--ietf” logs: >>>>>> >>>>>> 13:12 $ pyang --ietf --lint -f tree ietf-access-control-list.yang >>>>>> ietf-access-control-list.yang:51: error: bad value "YYYY-MM-DD" (should >>>>>> be date) >>>>>> module: ietf-access-control-list >>>>>> +--rw access-lists >>>>>> +--rw acl* [name] >>>>>> +--rw name string >>>>>> +--rw type? acl-type >>>>>> +--rw aces >>>>>> +--rw ace* [name] >>>>>> +--rw name string >>>>>> +--rw matches >>>>>> | +--rw (l2)? >>>>>> | | +--:(eth) >>>>>> | | +--rw eth {match-on-eth}? >>>>>> | | +--rw destination-mac-address? >>>>>> yang:mac-address >>>>>> | | +--rw destination-mac-address-mask? >>>>>> yang:mac-address >>>>>> | | +--rw source-mac-address? >>>>>> yang:mac-address >>>>>> | | +--rw source-mac-address-mask? >>>>>> yang:mac-address >>>>>> | | +--rw ethertype? >>>>>> eth:ethertype >>>>>> | +--rw (l3)? >>>>>> | | +--:(ipv4) >>>>>> | | | +--rw ipv4 {match-on-ipv4}? >>>>>> | | | +--rw dscp? inet:dscp >>>>>> | | | +--rw ecn? uint8 >>>>>> | | | +--rw length? uint16 >>>>>> | | | +--rw ttl? uint8 >>>>>> | | | +--rw protocol? uint8 >>>>>> | | | +--rw (source-port-range-or-operator)? >>>>>> | | | | +--:(range) >>>>>> | | | | | +--rw source-port-lower >>>>>> inet:port-number >>>>>> | | | | | +--rw source-port-upper >>>>>> inet:port-number >>>>>> | | | | +--:(operator) >>>>>> | | | | +--rw source-operator >>>>>> operator >>>>>> | | | | +--rw source-port >>>>>> inet:port-number >>>>>> | | | +--rw (destination-port-range-or-operator)? >>>>>> | | | | +--:(range) >>>>>> | | | | | +--rw destination-port-lower >>>>>> inet:port-number >>>>>> | | | | | +--rw destination-port-upper >>>>>> inet:port-number >>>>>> | | | | +--:(operator) >>>>>> | | | | +--rw destination-operator >>>>>> operator >>>>>> | | | | +--rw destination-port >>>>>> inet:port-number >>>>>> | | | +--rw ihl? uint8 >>>>>> | | | +--rw flags? bits >>>>>> | | | +--rw offset? uint16 >>>>>> | | | +--rw identification? uint16 >>>>>> | | | +--rw destination-ipv4-network? >>>>>> inet:ipv4-prefix >>>>>> | | | +--rw source-ipv4-network? >>>>>> inet:ipv4-prefix >>>>>> | | +--:(ipv6) >>>>>> | | +--rw ipv6 {match-on-ipv6}? >>>>>> | | +--rw dscp? inet:dscp >>>>>> | | +--rw ecn? uint8 >>>>>> | | +--rw length? uint16 >>>>>> | | +--rw ttl? uint8 >>>>>> | | +--rw protocol? uint8 >>>>>> | | +--rw (source-port-range-or-operator)? >>>>>> | | | +--:(range) >>>>>> | | | | +--rw source-port-lower >>>>>> inet:port-number >>>>>> | | | | +--rw source-port-upper >>>>>> inet:port-number >>>>>> | | | +--:(operator) >>>>>> | | | +--rw source-operator >>>>>> operator >>>>>> | | | +--rw source-port >>>>>> inet:port-number >>>>>> | | +--rw (destination-port-range-or-operator)? >>>>>> | | | +--:(range) >>>>>> | | | | +--rw destination-port-lower >>>>>> inet:port-number >>>>>> | | | | +--rw destination-port-upper >>>>>> inet:port-number >>>>>> | | | +--:(operator) >>>>>> | | | +--rw destination-operator >>>>>> operator >>>>>> | | | +--rw destination-port >>>>>> inet:port-number >>>>>> | | +--rw destination-ipv6-network? >>>>>> inet:ipv6-prefix >>>>>> | | +--rw source-ipv6-network? >>>>>> inet:ipv6-prefix >>>>>> | | +--rw flow-label? >>>>>> inet:ipv6-flow-label >>>>>> | +--rw (l4)? >>>>>> | | +--:(tcp) >>>>>> | | | +--rw tcp {match-on-tcp}? >>>>>> | | | +--rw sequence-number? uint32 >>>>>> | | | +--rw acknowledgement-number? uint32 >>>>>> | | | +--rw data-offset? uint8 >>>>>> | | | +--rw reserved? uint8 >>>>>> | | | +--rw flags? bits >>>>>> | | | +--rw window-size? uint16 >>>>>> | | | +--rw urgent-pointer? uint16 >>>>>> | | | +--rw options? uint32 >>>>>> | | +--:(udp) >>>>>> | | | +--rw udp {match-on-udp}? >>>>>> | | | +--rw length? uint16 >>>>>> | | +--:(icmp) >>>>>> | | +--rw icmp {match-on-icmp}? >>>>>> | | +--rw type? uint8 >>>>>> | | +--rw code? uint8 >>>>>> | | +--rw rest-of-header? uint32 >>>>>> | +--rw egress-interface? if:interface-ref >>>>>> | +--rw ingress-interface? if:interface-ref >>>>>> +--rw actions >>>>>> | +--rw forwarding identityref >>>>>> | +--rw logging? identityref >>>>>> +--ro statistics {acl-aggregate-stats}? >>>>>> +--ro matched-packets? yang:counter64 >>>>>> +--ro matched-octets? yang:counter64 >>>>>> >>>>>> augment /if:interfaces/if:interface: >>>>>> +--rw acls >>>>>> +--rw ingress >>>>>> | +--rw acl-sets >>>>>> | +--rw acl-set* [name] >>>>>> | +--rw name -> /access-lists/acl/name >>>>>> | +--rw type? -> /access-lists/acl/type >>>>>> | +--ro ace-statistics* [name] {interface-stats}? >>>>>> | +--ro name -> >>>>>> /access-lists/acl/aces/ace/name >>>>>> | +--ro matched-packets? yang:counter64 >>>>>> | +--ro matched-octets? yang:counter64 >>>>>> +--rw egress >>>>>> +--rw acl-sets >>>>>> +--rw acl-set* [name] >>>>>> +--rw name -> /access-lists/acl/name >>>>>> +--rw type? -> /access-lists/acl/type >>>>>> +--ro ace-statistics* [name] {interface-stats}? >>>>>> +--ro name -> >>>>>> /access-lists/acl/aces/ace/name >>>>>> +--ro matched-packets? yang:counter64 >>>>>> +--ro matched-octets? yang:counter64 >>>>>> >>>>>> Comments welcome! >>>>>> >>>>>> Cheers, >>>>>> >>>>>> Einar >>>>>> >>>>>> >>>>>> >>>>>>> On 14 Dec 2017, at 18:50, Einar Nilsen-Nygaard (einarnn) >>>>>>> <eina...@cisco.com <mailto:eina...@cisco.com>> wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> On 14 Dec 2017, at 08:21, Sonal Agarwal <sagarwa...@gmail.com >>>>>>>> <mailto:sagarwa...@gmail.com>> wrote: >>>>>>>> >>>>>>>> Hi Einar, >>>>>>>> >>>>>>>> You had 3 questions for me on all the several e-mail threads. >>>>>>>> 1. Global attachment point >>>>>>>> 2. icmp-off >>>>>>>> 3. acl-aggregate-interface stats. >>>>>>>> >>>>>>>> For (1), my first preference is to have the model define attachment >>>>>>>> point for interfaces only. >>>>>>> >>>>>>> einarnn> I have some diffs, layered on top of Mahesh’s PR to >>>>>>> netmod-wg/acl-model that do this. Nearly like the augmentation I have >>>>>>> below. Feel free to take a look at: >>>>>>> >>>>>>> https://github.com/mjethanandani/acl-model/pull/3 >>>>>>> <https://github.com/mjethanandani/acl-model/pull/3> >>>>>>> >>>>>>>> However, Kristian wants the global attachment point as well so that he >>>>>>>> can add the ACL to the linux tables. >>>>>>> >>>>>>> einarnn> I think Kristian doesn’t feel a global attachment point needs >>>>>>> to be in this first revision. But he can confirm. >>>>>>> >>>>>>>> If an ACL is attached globally, does this mean it is per direction or >>>>>>>> does it mean it is across directions? >>>>>>> >>>>>>> einarnn> I don’t know right now :-) >>>>>>> >>>>>>>> This global ACL may not be applicable to any of Cisco's service >>>>>>>> provider routers as I don't see any platform actually replicating the >>>>>>>> ACL to all line cards and attaching it in ingress and egress >>>>>>>> directions across all interfaces. >>>>>>> >>>>>>> einarnn> Per other emails, I don’t think we understand this enough yet >>>>>>> to specify it, so I suggest we just leave it out for now. Nothing in >>>>>>> the model prevents a “global attachment point” being added later once >>>>>>> we understand what it really means. >>>>>>> >>>>>>>> For (2), I am ok with removing icmp-off. >>>>>>> >>>>>>> einarnn> Done in my PR above. >>>>>>> >>>>>>>> For (3), this would have to be a combination of ACL stats across all >>>>>>>> interfaces for all ACL's. Something like this is possible on an XR box >>>>>>>> where ACES have counter names associated with it. Let's chat about >>>>>>>> this offline tomorrow. >>>>>>> >>>>>>> einarnn> I’ll ping you to clarify, and we can bring any conclusion back >>>>>>> to the list. >>>>>>> >>>>>>> Cheers, >>>>>>> >>>>>>> Einar >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Sonal. >>>>>>>> >>>>>>>> >>>>>>>> On Wed, Dec 13, 2017 at 12:10 PM, Mahesh Jethanandani >>>>>>>> <mjethanand...@gmail.com <mailto:mjethanand...@gmail.com>> wrote: >>>>>>>> We want to support “global” attachment point down the line, and that >>>>>>>> “global” attachment point will be one of the choices (the other being >>>>>>>> the interface), what would this augment look like. Note, as far as I >>>>>>>> know, you cannot augment inside a choice node. >>>>>>>> >>>>>>>>> On Dec 13, 2017, at 6:57 AM, Einar Nilsen-Nygaard (einarnn) >>>>>>>>> <eina...@cisco.com <mailto:eina...@cisco.com>> wrote: >>>>>>>>> >>>>>>>>> Perhaps like this, as an augmentation to the interface: >>>>>>>>> >>>>>>>>> augment /if:interfaces/if:interface: >>>>>>>>> +--rw ingress-acls >>>>>>>>> | +--rw acl-sets >>>>>>>>> | +--rw acl-set* [name] >>>>>>>>> | +--rw name -> /access-lists/acl/name >>>>>>>>> | +--rw type? -> /access-lists/acl/type >>>>>>>>> | +--ro ace-statistics* [name] {interface-stats}? >>>>>>>>> | +--ro name -> >>>>>>>>> /access-lists/acl/aces/ace/name >>>>>>>>> | +--ro matched-packets? yang:counter64 >>>>>>>>> | +--ro matched-octets? yang:counter64 >>>>>>>>> +--rw egress-acls >>>>>>>>> +--rw acl-sets >>>>>>>>> +--rw acl-set* [name] >>>>>>>>> +--rw name -> /access-lists/acl/name >>>>>>>>> +--rw type? -> /access-lists/acl/type >>>>>>>>> +--ro ace-statistics* [name] {interface-stats}? >>>>>>>>> +--ro name -> >>>>>>>>> /access-lists/acl/aces/ace/name >>>>>>>>> +--ro matched-packets? yang:counter64 >>>>>>>>> +--ro matched-octets? yang:counter64 >>>>>>>>> >>>>>>>>> Could also put an “aces” container above both these & rename >>>>>>>>> “ingress-acls" to “ingress”, etc. to give a single root for the >>>>>>>>> augmentation if preferred. >>>>>>>>> >>>>>>>>> Cheers, >>>>>>>>> >>>>>>>>> Einar >>>>>>>>> >>>>>>>>> >>>>>>>>>> On 6 Dec 2017, at 19:43, Eliot Lear <l...@cisco.com >>>>>>>>>> <mailto:l...@cisco.com>> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 12/6/17 7:23 PM, Mahesh Jethanandani wrote: >>>>>>>>>>> How does one move the interface attachment point, currently an >>>>>>>>>>> 'interface-ref', to an augmentation of the if:interfaces/interface, >>>>>>>>>>> inside of the ‘acl’ container? Down the line we might need to have >>>>>>>>>>> an >>>>>>>>>>> container for "attachment points" to accommodate the possibility of >>>>>>>>>>> attaching an ACL either to an interface or “globally”. >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Keeping in mind that one use is that an ACL doesn't attach to an >>>>>>>>>> interface at all. >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> netmod mailing list >>>>>>>>>> netmod@ietf.org <mailto:netmod@ietf.org> >>>>>>>>>> https://www.ietf.org/mailman/listinfo/netmod >>>>>>>>>> <https://www.ietf.org/mailman/listinfo/netmod> >>>>>>>>> >>>>>>>> >>>>>>>> Mahesh Jethanandani >>>>>>>> mjethanand...@gmail.com <mailto:mjethanand...@gmail.com> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> netmod mailing list >>>>>>>> netmod@ietf.org <mailto:netmod@ietf.org> >>>>>>>> https://www.ietf.org/mailman/listinfo/netmod >>>>>>>> <https://www.ietf.org/mailman/listinfo/netmod> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> netmod mailing list >>>>>>> netmod@ietf.org <mailto:netmod@ietf.org> >>>>>>> https://www.ietf.org/mailman/listinfo/netmod >>>>>>> <https://www.ietf.org/mailman/listinfo/netmod> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> netmod mailing list >>>>>> netmod@ietf.org <mailto:netmod@ietf.org> >>>>>> https://www.ietf.org/mailman/listinfo/netmod >>>>>> <https://www.ietf.org/mailman/listinfo/netmod> >>>>> >>>> >>> >>> _______________________________________________ >>> netmod mailing list >>> netmod@ietf.org <mailto:netmod@ietf.org> >>> https://www.ietf.org/mailman/listinfo/netmod >>> <https://www.ietf.org/mailman/listinfo/netmod> >> >> Mahesh Jethanandani >> mjethanand...@gmail.com <mailto:mjethanand...@gmail.com> >> _______________________________________________ >> netmod mailing list >> netmod@ietf.org <mailto:netmod@ietf.org> >> https://www.ietf.org/mailman/listinfo/netmod >> <https://www.ietf.org/mailman/listinfo/netmod> > Mahesh Jethanandani mjethanand...@gmail.com
_______________________________________________ netmod mailing list netmod@ietf.org https://www.ietf.org/mailman/listinfo/netmod
