Hello I want to put IB HCA port into non-default partition to create separate network on my IB fabric. On IB switch (Voltaire ISR9096) I created network with non-default partition key 0x7ffe and add HCA port to this partition.
But this IB-VPPA was displayed as unconfigured on Solaris host ib::3BA0001004181,ffff,ipib IB-VPPA connected configured ok ib::3BA0001004182,fffe,ipib IB-VPPA connected unconfigured unknown ib::3BA0001004182,ffff,ipib IB-VPPA connected configured ok Configuration of new VPPA with cfgadm was unsuccessful: # cfgadm -c configure ib::3BA0001004182,fffe,ipib Configure the device: /devices/ib:fabric::3BA0001004182,fffe,ipib This operation will suspend activity on the IB device Continue (yes/no)? yes cfgadm: Hardware specific failure: configure operation failed ap_id: /devices/ib:fabric::3BA0001004182,fffe,ipib I unconfigured VPPA with default partition key (0xffff) on HCA port 0x3BA0001004182 and issued cfgadm for VPPA with pkey 0xfffe again - the same effect. I tried this on Solaris 10 8/07 and OpenSolaris b72 with the same result - no success ;) Is it possible to configure VPPA with non-default pkey on Solaris ? Is it possible to configure more than 1 IPIB VPPA on single HCA port ? How to perform these configurations ? Thanks in advance. Regards, Denis This message posted from opensolaris.org _______________________________________________ networking-discuss mailing list [email protected]
