hello,
I am testing my gldv3 driver on the very latest OpenSolaris nv99 OS. I
encountered an issue, my driver, qla, though can be successfully detected and
loaded by OS, always fail to plumb.
# dladm show-link
LINK CLASS MTU STATE OVER
e1000g0 phys 1500 up --
e1000g1 phys 1500 unknown --
qla0 phys 1500 unknown --
qla1 phys 1500 unknown --
# prtconf -D | grep qla
pci1077,8012, instance #0 (driver name: qla)
pci1077,8012, instance #1 (driver name: qla)
But it fails to plumb.
# ifconfig qla0 plumb
ifconfig: cannot open link "qla0": No such device or address
After reading the message log, it looks like the driver was attached, but soon
an error happens and detached.
Oct 28 19:36:04 unknown genunix: [ID 992123 kern.notice] qla_attach: entered
Oct 28 19:36:04 unknown qla: [ID 671517 kern.notice] qla GLD3 Driver v1.00
Instance: 0.
Oct 28 19:36:05 unknown qla: [ID 858521 kern.notice] Driver added to pcie_pci:
Oct 28 19:36:06 unknown genunix: [ID 659664 kern.notice] qla_m_getcapab(0)
entered
Oct 28 19:36:06 unknown mac: [ID 469746 kern.info] NOTICE: qla0 registered
Oct 28 19:36:06 unknown qla: [ID 774214 kern.info] qla0: ATTACHED
But a few moment later, an error is found by OS and the driver is required to
detach.
Oct 28 19:36:19 unknown rcm_daemon[100179]: [ID 623728 daemon.error] IP: Cannot
plumb (qla0) No such file or directory
Oct 28 19:36:19 unknown rcm_daemon[100179]: [ID 156048 daemon.error] IP: IPv4
Post-attach failed (qla0)
Oct 28 19:36:57 unknown genunix: [ID 996642 kern.notice] qla_detach(0): entered
Oct 28 19:36:57 unknown genunix: [ID 996642 kern.notice] qla_free_resources(0):
entered
Oct 28 19:36:57 unknown mac: [ID 736570 kern.info] NOTICE: qla0 unregistered
Oct 28 19:36:57 unknown genunix: [ID 978816 kern.notice] qla_detach(0): exit 0
?? I have tested this Gldv3 driver back in June or July on an old version of
OpenSolaris. I am wondering how do fix this issue?
Tom
--
This message posted from opensolaris.org
_______________________________________________
networking-discuss mailing list
[email protected]
