Hello,
When I run NICDrv test09(Link Aggregation) to test my GLDv3 driver, I stopped
the test in the middle and reboot the OS. However, then I can not use ifconfig
to start my driver.
The OS is Solaris 10, but I saw someone else reported it happens on OpenSolaris
also, probably due to same code. How do I fix/work around this issue?
Tom
bash-3.00# uname -a
SunOS euclid 5.10 Generic_139555-08 sun4u sparc SUNW,Sun-Fire-V215
bash-3.00# ifconfig qlge0 plumb 192.168.43.50 up
Jul 23 11:47:55 euclid qlge: NOTICE: ql_bringup_adapter(0): entered
Jul 23 11:47:55 euclid qlge: NOTICE: ql_bringup_adapter(0): done
ifconfig: Jul 23 11:47:55 euclid ip: qlge0: DL_BIND_REQ failed: DL_SYSERR
(errno 16)
Jul 23 11:47:55 euclid ip: qlge0: DL_UNBIND_REQ failed: DL_OUTSTATE
SIOCSLIFNAME for ip: qlge0: Device busy
Jul 23 11:47:55 euclid qlge: NOTICE: ql_bringdown_adapter(0): entered
Jul 23 11:47:56 euclid qlge: NOTICE: ql_bringdown_adapter(0): done
bash-3.00#
bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=201004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4,CoS> mtu 1500
index 2
inet 172.17.140.183 netmask fffffe00 broadcast 172.17.141.255
ether 0:14:4f:7a:b2:20
--
This message posted from opensolaris.org
_______________________________________________
networking-discuss mailing list
[email protected]
