On Tue, 2008-10-21 at 11:03 +0300, Tambet Ingo wrote: > On Tue, Oct 21, 2008 at 10:47 AM, Craig Main <[EMAIL PROTECTED]> wrote: > > I am having a similar issue on my Dell Latitude E6500 which has a Broadcom > > 5530 buildin hsdpa minicard. This device gives an ERROR when sent an ATZ > > command. Using a chat script or wvdial with a cusomized wvdial.conf file > > which leaves out the ATZ command, the modem works flawlessly. When using > > NetworkManager however it does not. Here is the trace from NetworkManager > > DEBUG: > > > > NetworkManager: <info> Activation (ttyACM0) starting connection 'Vodacom' > > NetworkManager: <info> (ttyACM0): device state change: 3 -> 4 > > NetworkManager: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) > > scheduled... > > NetworkManager: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) > > started... > > NetworkManager: <debug> [1224572376.061516] nm_serial_device_open(): > > (ttyACM0) opening device... > > NetworkManager: <info> Activation (ttyACM0) Stage 1 of 5 (Device Prepare) > > complete. > > NetworkManager: <debug> [1224572376.169089] nm_serial_debug(): Sending: 'ATZ > > E0 V1 X4 &C1 +FCLASS=0 > > ' > > NetworkManager: <debug> [1224572376.196931] nm_serial_debug(): Got: 'ATZ E0 > > V1 X4 &C1 +FCLASS=0 > > ' > > NetworkManager: <debug> [1224572376.246578] nm_serial_debug(): Got: 'ATZ E0 > > V1 X4 &C1 +FCLASS=0 > > > > > > ERROR > > > > ' > > The init string has more commands than (AT)Z (reset): It turns off > echo (E0), sets verbose mode (V1) etc... Can you try to send only > "ATZ" and "ATZ E0 V1" to your modem (using minicom or kermit or > wvdial) and see if that works? Or if it's specifically "Z" command > that doesn't work, does this command work: "ATE1 V1 X4 &C1 +FCLASS=0" > ? I've seen a device which doesn't like "+FCLASS" command. >
--Minicom Trace-- Welcome to minicom 2.3 OPTIONS: I18n Compiled on May 3 2008, 10:44:23. Port /dev/ttyACM0 Press CTRL-A Z for help on special keys AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0 OK atz ERROR ATE1 V1 X4 &C1 +FCLASS=0 OK ATZ E0 V1 ERROR --End Trace-- On a slightly related note, this modem also requires that the RF circuit gets turned on with AT+CFUN=1 Thanks Craig To read FirstRand Bank's Disclaimer for this email click on the following address or copy into your Internet browser: https://www.fnb.co.za/disclaimer.html If you are unable to access the Disclaimer, send a blank e-mail to [EMAIL PROTECTED] and we will send you a copy of the Disclaimer.
_______________________________________________ NetworkManager-list mailing list NetworkManager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list