On Thu, 23 Sep 1999, you wrote:
> I have a PEL-1600 Scsi card for my CDR. It is supposed to use the
> AHA152x module. I did some research on the net, and found that somebody
> was able to get it working using the following command
>
> aha152x=0x340,10,7,1
>
> unfortunately, I don't know where to put this command. I want this card
> recognized at bootup everytime, and would like to not have to type this
> command in every time.
>
> I tried this in conf.modules, but it crashed the box.
If you simply use a conf option example from someone else make sure
that IRQ is not in use, if it is then that is possably the reason why
conf.modules crashed your machine.
Setserial will do exachtly the same, i suggest you read the SCSI
HOWTO found in /usr/doc/* and find out which IRQ's are used and which
are resurved for PCI devices, before you do anything else.
> Help please.
>
> Thanks,
> Mark
--
Regards Richard
[EMAIL PROTECTED]
