Hoyt Bailey wrote: > On Friday 27 August 2004 08:58, Thereidos wrote: > >>W liÅcie z piÄ, 27-08-2004, godz. 14:44, Hoyt Bailey pisze: >> >>>On Friday 27 August 2004 00:27, Rob Blomquist wrote: >>><snip> >>> >>>>BTW, I believe that the path /mkdev/mkdev.sh is meant to be >>>>within the source code folder, so that a program that usually >>>>runs during make or make-install is run. >>> >>>I finally found /mkdev.sh burried in lm_sensors-2.8.5 >>>directory. /home/hoyt/Programs/lm_sensors-2.8.5/prog/mkdev/mkdev.sh >>> Running the mkdev.sh allows sensors-detect to run but in the end I >>>could not get the temp's, fans into gkrellm. The following seems to >>>be the problem: >>>1. For 2.6 kernels, make sure you have mounted sysfs and done >>>'modprobe i2c_sensor'! >>>2. For older kernels, make sure you have done 'modprobe i2c-proc'! >>>Line 1 seems important but I dont know what it means. >>> >>>[EMAIL PROTECTED] hoyt]$ locate sysfs >>>/home/hoyt/Programs/lm_sensors-2.8.5/doc/developers/sysfs-interface >>>There are a lot of sysfs entries but apparantly there is one >>>missing. >> >>This is what I've got about mounting sysfs : >> >>>Add as root this line to /etc/fstab >>> >>>sysfs /sys sysfs rw 0 0 > > done > >>>than just write >>> >>>mount /sys > > [EMAIL PROTECTED] hoyt]# mount /sys > mount: sysfs already mounted or /sys busy > mount: according to mtab, none is already mounted on /sys > No sys in /etc/fstab except the line above? > >>>If it complains that directory does not exists just create it >>>(mkdir /sys) >>>and repeat :) >> >>Let me know if it helped... > > [EMAIL PROTECTED] hoyt]# cat /etc/fstab > /dev/hda6 / ext3 defaults 1 1 > /dev/hda12 /backup ext3 defaults 1 2 > /dev/hda1 /boot ext3 defaults 1 2 > none /dev/pts devpts mode=0620 0 0 > /dev/hda7 /home ext3 defaults 1 2 > none /mnt/floppy supermount > dev=/dev/fd0,fs=ext2:vfat,--,umask=0,iocharset=iso8859-1,sync,codepage=850 > 0 0 > /dev/hda10 /music ext3 defaults 1 2 > none /proc proc defaults 0 0 > /dev/hda8 /tmp ext3 defaults 1 2 > /dev/hda9 /usr ext3 defaults 1 2 > /dev/hda11 /var ext3 defaults 1 2 > /dev/hda5 swap swap defaults 0 0 > /dev/hdc /mnt/cdrom auto > umask=0,user,iocharset=iso8859-1,codepage=850,noauto,ro,exec 0 0 > sysfs /sys sysfs rw 0 0 > > [EMAIL PROTECTED] hoyt]# cat /etc/mtab > /dev/ide/host0/bus0/target0/lun0/part6 / ext3 rw 0 0 > none /proc proc rw 0 0 > none /proc/bus/usb usbdevfs rw 0 0 > none /dev devfs rw 0 0 > none /sys sysfs rw 0 0 > /dev/ide/host0/bus0/target0/lun0/part12 /backup ext3 rw 0 0 > /dev/ide/host0/bus0/target0/lun0/part1 /boot ext3 rw 0 0 > none /dev/pts devpts rw,mode=0620 0 0 > /dev/ide/host0/bus0/target0/lun0/part7 /home ext3 rw 0 0 > none /mnt/floppy supermount > rw,sync,dev=/dev/fd0,fs=ext2:vfat,--,umask=0,iocharset=iso8859-1,codepage=850 > 0 0 > /dev/ide/host0/bus0/target0/lun0/part10 /music ext3 rw 0 0 > /dev/ide/host0/bus0/target0/lun0/part8 /tmp ext3 rw 0 0 > /dev/ide/host0/bus0/target0/lun0/part9 /usr ext3 rw 0 0 > /dev/ide/host0/bus0/target0/lun0/part11 /var ext3 rw 0 0 > automount(pid4018) /net autofs rw,fd=5,pgrp=4018,minproto=2,maxproto=4 0 > 0 > automount(pid4016) /misc autofs rw,fd=5,pgrp=4016,minproto=2,maxproto=4 > 0 0 > Well thats what happened? > > This is a guess but, maybe try, as root "ldconfig"
Also you mentioned you got sensors-detect to run but, nothing on gkrellem. Do you get an output from the "sensors" command? Mike
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
