Here's some more info I discovered looking at dmesg:
ide_setup: hdc=ide-scsi is this right?
hdb: ASUS CD-S400/A, ATAPI CDROM drive
hdc: CREATIVE CD-RW RW4224E, ATAPI CDROM drive
hdc: IRQ probe failed (0)
hdd: IRQ probe failed (0)
hdd: IRQ probe failed (0)
hdc: driver not present
hdc: driver not present
3c59x.c:v0.99H 11/17/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905B Cyclone 100baseTx at 0xe400, 00:50:da:7c:15:82, IRQ 3
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 786d.
MII transceiver found at address 0, status 786d.
Enabling bus-master transmits and whole-frame receives.
hdc: driver not present
hdc: driver not present
hdc: driver not present
hdc: driver not present
hdc: driver not present
hdc: driver not present
hdc: driver not present
hdc: driver not present
VFS: Disk change detected on device ide0(3,64)
