I'm sorry, I am kind of new at all this I believe I mislead you in thinking
that the system is already installed. It is not. I am trying to install corp
server 1.1 on a box with 2 ata100 drives and I can't get corp server 1.1 to
find the drives. What do I have to do to fix this?
I have an Abit KT7-RAID motherboard
Thank you,
Steve
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of civileme
Sent: Saturday, January 06, 2001 5:11 AM
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Boot disk for Corp Server 1.1 that enables DMA?
On Friday 05 January 2001 17:42, you wrote:
> Is there an updated boot img for corp server 1.1 that will enable dma
> access as the new 7.2 boot img does?
Umm, just add
idex=autotune #where x is the number of the channel
# you want to be optimized
to the "append" blank using DrakBoot
Or hdparm -Xmn /dev/hda # where mn=64+mode number for udma or 32+mode number
for mdma
at the end of /etc/rc.local
You do NOT have udma5 available in the kernel, that came with 7.2, but up to
udma4 you should be OK. I assume you have a newer chipset otherwise hdparm
-X may also require some care, like writing to a safe area of the disk to
test the writing first. But the modern chipsets for 686 class processors
should have no problem with hdparm -X
Civileme
>
> TIA
> Steve
