On Thu, 21 Apr 2005 21:38:33 +0200 Kaj Haulrich <[EMAIL PROTECTED]> wrote:
#On Thursday 21 April 2005 20:45, Rosemary McGillicuddy wrote: #> I have a Memory Stick USB 2.0 card reader/writer which I use in #> my Sony camera. I have two ports on the front of the box and #> four at the back. How are there numbered in terms of the hardware #> listing in harddrake? #> #> I have plugged the cardreader (with memory card in it) in, #> nothing happens. What do I need to please? #> Thanks #> #> Rosemary # #It doesn't matter which port you connect to. And a silly question : #Do you have services *hal* and *messagebus* running ? #Furthermore : *urpmi usbview*. # #HTH #Kaj Haulrich. Rosemary, I've had the same problem since I brought this machine with mdk 9.0 installed. Initially it would not recognise my camera (kodak DC3200, serial port) so got a DSE xh6747 card reader and although M$ would read the card Mdk would not, and still does not read the CF (compact flash) card. After seeing Kaj's response I started the services he mentioned but still no luck. I then tried the MMC/SD card that the new camera (Kodak CX7330) uses and that is read fine, whether or not 'hal' and/or 'messagebus' are running. My conculsion - Mdk is not recognising the formating used by the Kodak DC3200 camera. E. David I. Taylor Beneath the Mountain, beside the Sea; Taranaki, the place to be. composed using Sylpheed, sent from a 100% Linux/Open Source computer featuring Mandrakelinux release 10.1 (Official) for i586 kernel 2.6.8.1-12mdk & @ 17:14:44 up 1:07, 1 user, load average: 0.08, 0.02, 0.01
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
