Russell Butler wrote:
SnapafunFrank wrote:
Kaj Haulrich wrote:
Russell Butler wrote:
I have just acquired a Panasonic Camcorder which has an SD flash card
for stills, and in theory can download via USB port. I am trying to
load
to an Acer laptop, currently with 2006-RC2 installed
(kernel-2.6.12-12mdk-i686-up-4GB) From what I have read, plugging in
the usb cable should bring up a "drive" as /mnt/removable. But it
doesn't happen. Certainly on that other so-called operating system, it
shows as a "mass-storage device".
I started of with 2005-LE with 2.6.11 kernel, then loaded 2.6.12 then
tried loading 2006-RC2.
Do you have the following services running ?
hal
messagebus
udev
And installed : gnome.volume-manager ?
Kaj Haulrich.
And just in case: have you turned the camera on once plugged in ?
Thank you for the responses
Yes, I have tried turning camera off & on, booting with camera
connected, plugging and unplugging usb cable.
MCC Services shows haldaemon and messagebus running,
ps ax |grep udev
946 ? S<s 0:00 udevd -d
urpmi shows gnome-volume-manager everything installed.
The following in syslog may help:
Oct 3 17:17:00 virgil kernel: usb 4-3: new high speed USB device
using ehci_hcd
and address 2
Oct 3 17:17:01 virgil kernel: SCSI subsystem initialized
Oct 3 17:17:01 virgil kernel: Initializing USB Mass Storage driver...
Oct 3 17:17:01 virgil kernel: scsi0 : SCSI emulation for USB Mass
Storage device
s
Oct 3 17:17:01 virgil kernel: usb-storage: device found at 2
Oct 3 17:17:01 virgil kernel: usb-storage: waiting for device to
settle before s
canning
Oct 3 17:17:01 virgil kernel: usbcore: registered new driver usb-storage
Oct 3 17:17:01 virgil kernel: USB Mass Storage support registered.
Oct 3 17:17:01 virgil udev[4275]: run_program: exec of program failed
Oct 3 17:17:02 virgil hald[3309]: Timed out waiting for hotplug event
959. Rebas
ing to 997
Oct 3 17:17:56 virgil kernel: usb 4-3: reset high speed USB device
using ehci_hc
d and address 2
Oct 3 17:18:12 virgil kernel: scsi: Device offlined - not ready after
error reco
very: host 0 channel 0 id 0 lun 0
Oct 3 17:18:12 virgil kernel: usb-storage: device scan complete
Oct 3 17:21:53 virgil kernel: usb 4-3: USB disconnect, address 2
Oct 3 17:22:03 virgil kernel: usb 4-3: new high speed USB device
using ehci_hcd
and address 3
Oct 3 17:22:03 virgil kernel: scsi1 : SCSI emulation for USB Mass
Storage device
s
Oct 3 17:22:03 virgil kernel: usb-storage: device found at 3
Oct 3 17:22:03 virgil kernel: usb-storage: waiting for device to
settle before s
canning
Oct 3 17:22:03 virgil udev[4342]: run_program: exec of program failed
Oct 3 17:22:33 virgil kernel: usb 4-3: USB disconnect, address 3
Oct 3 17:22:33 virgil kernel: scsi: Device offlined - not ready after
error reco
very: host 1 channel 0 id 0 lun 0
Oct 3 17:22:33 virgil kernel: usb-storage: device scan complete
Oct 3 17:22:33 virgil kernel: Unable to handle kernel NULL pointer
dereference a
t virtual address 00000048
Thanks
Russell
Well I'm only a newbie here but Kaj's reply needs to be addressed as it
appears to me that your udev is broke somehow ?????
--
Newbie Seeking USER_FUNCTIONALITY always!
Regards
SnapafunFrank
Big or small, a challenge requires the same commitment to resolve.
Registered Linux User # 324213 [ http://counter.li.org/ ]
____________________________________________________
Want to buy your Pack or Services from Mandriva?
Go to http://store.mandriva.com
Join the Club : http://www.mandrivaclub.com
____________________________________________________
