Hi Bill, Thank you for taking time to answer my mail. As you may have seen in my previous note, my mandrake 10.2 work as you describe about keydrive, and not anymore since I have migrate. It possible I have done something wrong and I trying to figure steps to follows to solve my issue.
Following this tutorial "http://tldp.org/HOWTO/html_single/Flash-Memory-HOWTO/";, I start to have difference starting on 7.3 on my computer, I can see th following under /proc/bus/usb/, (the drivers file is not there ) [EMAIL PROTECTED] usb]# ls -la total 0 drwxr-xr-x 5 root root 0 fév 22 11:31 ./ dr-xr-xr-x 4 root root 0 fév 22 10:09 ../ dr-xr-xr-x 2 root root 0 fév 22 11:31 001/ dr-xr-xr-x 2 root root 0 fév 22 11:31 002/ dr-xr-xr-x 2 root root 0 fév 22 11:31 003/ -r--r--r-- 1 root root 0 fév 22 14:54 devices And I nothing was create under /proc/scsi/. Any steps to solve my issue or comments are wellcome Cheers Moses Quoting Bill Spatz <[EMAIL PROTECTED]>: > On Thursday 23 February 2006 03:38 am, [EMAIL PROTECTED] wrote: > > Hi All, I have upgrade my Mandriva from 10.2 to 2006 and since this > > upgrade, I am not able to auto mount my usb drive when I plug them. > > > > Here is my config > > ThinkPad IBM T41 > > [EMAIL PROTECTED] ~]# rpm -qa | grep kernel > > kernel-i586-up-1GB-2.6.11.6mdk-1-1mdk > > kernel-i686-up-4GB-2.6.11.6mdk-1-1mdk > > 2006 does a pretty good job at detecting and automounting USB sticks. > > Plug your keydrive in, wait a few seconds and click the devices icon, it > should be there. > > Bill > ____________________________________________________ Want to buy your Pack or Services from Mandriva? Go to http://store.mandriva.com Join the Club : http://www.mandrivaclub.com ____________________________________________________
