On Thursday 23 February 2006 06:32 am, [EMAIL PROTECTED] wrote: > Hi Bill, > Thank you for taking time to answer my mail. > As you may have seen in my previous note, my mandrake 10.2 work as > you describe about keydrive, and not anymore since I have migrate. It > possible I have done something wrong and I trying to figure steps to > follows to solve my issue. > > Following this tutorial > "http://tldp.org/HOWTO/html_single/Flash-Memory-HOWTO/";, I start to > have difference starting on 7.3 > on my computer, I can see th following under /proc/bus/usb/, (the > drivers file is not there ) > [EMAIL PROTECTED] usb]# ls -la > total 0 > drwxr-xr-x 5 root root 0 fév 22 11:31 ./ > dr-xr-xr-x 4 root root 0 fév 22 10:09 ../ > dr-xr-xr-x 2 root root 0 fév 22 11:31 001/ > dr-xr-xr-x 2 root root 0 fév 22 11:31 002/ > dr-xr-xr-x 2 root root 0 fév 22 11:31 003/ > -r--r--r-- 1 root root 0 fév 22 14:54 devices > > And I nothing was create under /proc/scsi/. > > Any steps to solve my issue or comments are wellcome > > Cheers > > Moses > > Quoting Bill Spatz <[EMAIL PROTECTED]>: > > On Thursday 23 February 2006 03:38 am, [EMAIL PROTECTED] wrote: > > > Hi All, I have upgrade my Mandriva from 10.2 to 2006 and since > > > this upgrade, I am not able to auto mount my usb drive when I > > > plug them. > > > > > > Here is my config > > > ThinkPad IBM T41 > > > [EMAIL PROTECTED] ~]# rpm -qa | grep kernel > > > kernel-i586-up-1GB-2.6.11.6mdk-1-1mdk > > > kernel-i686-up-4GB-2.6.11.6mdk-1-1mdk > > > > 2006 does a pretty good job at detecting and automounting USB > > sticks. > > > > Plug your keydrive in, wait a few seconds and click the devices > > icon, it should be there. > > > > Bill Hi Moses,
Plug your drive in and then do a "cat /etc/fstab" (without quotes) you should see a line similar to this: /dev/sda1 /mnt/removable vfat rw,nosuid,nodev,noatime,codepage=850,iocharset=iso8859-1,user=bill 0 0 Mandriva mounts the device as /mnt/removable and uses sda1 as the device rather than scsi. Also mine shows up under EHCI and not UHCI when using usbview an ls of the scsi directory looks like this for mine: [EMAIL PROTECTED] ~]$ cd /proc/scsi [EMAIL PROTECTED] scsi]$ ls device_info scsi usb-storage/ [EMAIL PROTECTED] scsi]$ cd usb-storage [EMAIL PROTECTED] usb-storage]$ ls 2 Bill
pgppv4yrkasTP.pgp
Description: PGP signature
