I downloaded the binaries for 4.1.0 from the Xfree site and attempted to
install them on my Compaq Armada 3500. My original setup was a Redhat 7.1
with XFree 4.0.1. But I believe the actual driver being use was the 3
series. When I issue a startx, I only get a blank screen. I can not
ctrl-c or ctrl-alt-backspace out of it. ctrl-alt-del does let me reboot.
My first time installing was to install directly over the working X setup.
When this failed, I removed /etc/X11 and /usr/X11R6 and then did another
install. I installed all of the options and I still had the blank screen.
I removed the directories and tried again without any of the options and it
still did not work. I have ran strace, it looks like xinit gets to the
point of waiting for data of the AF_INET socket for X0 in the temp
directory. The X server (XFree86) goes really to the point of creating the
AF_INET socket for X0 and output log stuff. And then it hangs. If I pipe
the output of startx to a log file I get an xinit: Resource temporarily
unavailable (errno 11). But I think this due to the ctrl-alt-del. I get
no other error message. I have tried xf86config to create a config file.
xf86cfg crashes with lots of undefined symbols in .o files. I get the same
results with a config file for Xconfigurator. I tried a "NoDDC" option but
still no luck. Any help would be appreciated.
Sorry about the long e-mail but I wanted to provide as much info as
possible.
Video Card is Chips and Technologies 69000 (Note I tried different numbers
here such as 65520)
Laptop with 1024x768 resolution.
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the
"Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included
in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
# Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 57.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-150
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "Chips & Technologies CT65520"
Driver "chips"
#VideoRam 2048
# Device section for C&T cards.
# Option "suspend_hack"
# Option "STN"
# Option "no_stretch"
# Option "no_center"
# Option "use_modeline"
# Option "fix_panel_size"
# videoram 512
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Chips & Technologies CT65520"
Monitor "My Monitor"
DefaultDepth 8
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "640x480" "800x600" "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.4 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Sep 11 01:41:15 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "Chips & Technologies CT65520"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/
lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000893c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7192 card 0e11,0464 rev 02 class 06,00,00 hdr
00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr
80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr
00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr
00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr
00
(II) PCI: 00:08:0: chip 102c,00c0 card 0e11,b101 rev 64 class 03,00,00 hdr
00
(II) PCI: 00:11:0: chip 104c,ac17 card 1400,0000 rev 02 class 06,07,00 hdr
82
(II) PCI: 00:11:1: chip 104c,ac17 card 1c00,0000 rev 02 class 06,07,00 hdr
82
(II) PCI: 01:00:0: chip 9004,6075 card 9004,7560 rev 03 class 01,00,00 hdr
00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 1: bridge is at (0:0:0), (-1,1,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:8:0) C&T 69000 rev 100, Mem @ 0x40000000/24
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0x10000000 - 0x1000ffff (0x10000) MX[B]
[1] -1 0x10400000 - 0x10400fff (0x1000) MX[B]
[2] -1 0x50000000 - 0x5fffffff (0x10000000) MX[B]
[3] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[4] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[5] -1 0x00001000 - 0x0000101f (0x20) IX[B]
[6] -1 0x00001020 - 0x0000102f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0x10000000 - 0x1000ffff (0x10000) MX[B]
[1] -1 0x10400000 - 0x10400fff (0x1000) MX[B]
[2] -1 0x50000000 - 0x5fffffff (0x10000000) MX[B]
[3] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[4] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[5] -1 0x00001000 - 0x0000101f (0x20) IX[B]
[6] -1 0x00001020 - 0x0000102f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x10000000 - 0x1000ffff (0x10000) MX[B]
[6] -1 0x10400000 - 0x10400fff (0x1000) MX[B]
[7] -1 0x50000000 - 0x5fffffff (0x10000000) MX[B]
[8] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[12] -1 0x00001000 - 0x0000101f (0x20) IX[B]
[13] -1 0x00001020 - 0x0000102f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "chips"
(II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o
(II) Module chips: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) Primary Device is: PCI 00:08:0
(--) Assigning device section with no busID to primary device
(--) Chipset ct69000 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x10000000 - 0x1000ffff (0x10000) MX[B]
[6] -1 0x10400000 - 0x10400fff (0x1000) MX[B]
[7] -1 0x50000000 - 0x5fffffff (0x10000000) MX[B]
[8] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[12] -1 0x00001000 - 0x0000101f (0x20) IX[B]
[13] -1 0x00001020 - 0x0000102f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x10000000 - 0x1000ffff (0x10000) MX[B]
[6] -1 0x10400000 - 0x10400fff (0x1000) MX[B]
[7] -1 0x50000000 - 0x5fffffff (0x10000000) MX[B]
[8] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[9] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[15] -1 0x00001000 - 0x0000101f (0x20) IX[B]
[16] -1 0x00001020 - 0x0000102f (0x10) IX[B]
[17] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[18] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) CHIPS(0): initializing int10
(II) CHIPS(0): Primary V_BIOS segment is: 0xc000
(II) CHIPS(0): VESA BIOS detected
(II) CHIPS(0): VESA VBE Version 2.0
(II) CHIPS(0): VESA VBE Total Mem: 2048 kB
(II) CHIPS(0): VESA VBE OEM: CHIPS 69000 Super VGA
(II) CHIPS(0): VESA VBE OEM Software Rev: 1.0
(II) CHIPS(0): VESA VBE OEM Vendor: Chips & Technologies, Inc.
(II) CHIPS(0): VESA VBE OEM Product: 69000 Display Controller
(II) CHIPS(0): VESA VBE OEM Product Rev: 2
(**) CHIPS(0): Depth 8, (--) framebuffer bpp 8
(==) CHIPS(0): Default visual is PseudoColor
(==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0)
(==) CHIPS(0): Using HW cursor
(**) CHIPS(0): Enabling linear addressing
(--) CHIPS(0): base address is set at 0x40000000.
(**) CHIPS(0): Using MMIO
(--) CHIPS(0): VideoRAM: 2048 kByte
(--) CHIPS(0): TFT probed
(--) CHIPS(0): LCD
(--) CHIPS(0): Display Size: x=1024; y=768
(--) CHIPS(0): PCI Bus
(--) CHIPS(0): Internal DAC disabled
(--) CHIPS(0): Using programmable clocks
(--) CHIPS(0): Dot clock 0: 25.176 MHz
(--) CHIPS(0): Dot clock 1: 28.310 MHz CRTclk
(--) CHIPS(0): Dot clock 2: 64.982 MHz FPclk
(--) CHIPS(0): Probed memory clock of 83.045 MHz
(==) CHIPS(0): Min pixel clock is 11.000 MHz
(--) CHIPS(0): Max pixel clock is 135.000 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) CHIPS(0): VESA VBE DDC supported
(II) CHIPS(0): VESA VBE DDC Level none
(II) CHIPS(0): VESA VBE DDC transfer in appr. 0 sec.
(II) CHIPS(0): VESA VBE DDC read successfully
(II) CHIPS(0): Manufacturer: @@@ Model: 1 Serial#: 541065216
(II) CHIPS(0): Year: 1990 Week: 0
(II) CHIPS(0): EDID Version: 32.0
(II) CHIPS(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) CHIPS(0): Sync:
(II) CHIPS(0): Max H-Image Size [cm]: horiz.: 1 vert.: 22
(II) CHIPS(0): Gamma: 1.33
(II) CHIPS(0): No DPMS capabilities specified; Monochorome/GrayScale
Display
(II) CHIPS(0): redX: 0.129 redY: 0.000 greenX: 0.000 greenY: 0.289
(II) CHIPS(0): blueX: 0.129 blueY: 0.003 whiteX: 0.000 whiteY: 0.001
(II) CHIPS(0): Manufacturer's mask: 0
(--) CHIPS(0): unexpected EDID version 32 revision 0
(II) CHIPS(0): My Monitor: Using hsync range of 31.50-57.00 kHz
(II) CHIPS(0): My Monitor: Using vrefresh range of 40.00-150.00 Hz
(II) CHIPS(0): Clock range: 11.00 to 135.00 MHz
(II) CHIPS(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1024x768" (hsync out of range)
(II) CHIPS(0): Not using default mode "1024x768" (hsync out of range)
(II) CHIPS(0): Not using default mode "1152x864" (hsync out of range)
(II) CHIPS(0): Not using default mode "1280x960" (hsync out of range)
(II) CHIPS(0): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1280x1024" (hsync out of range)
(II) CHIPS(0): Not using default mode "1280x1024" (hsync out of range)
(II) CHIPS(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) CHIPS(0): Not using default mode "1400x1050" (hsync out of range)
(II) CHIPS(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) CHIPS(0): Not using mode "1280x1024" (no mode of this name)
(--) CHIPS(0): Virtual size is 1024x768 (pitch 1024)
(**) CHIPS(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) CHIPS(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509
-hsync -vsync
(**) CHIPS(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) CHIPS(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
631 +hsync +vsync
(**) CHIPS(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) CHIPS(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
(--) CHIPS(0): Display dimensions: (1, 22) cm
(--) CHIPS(0): DPI set to (2600, 88)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0x40000000 - 0x40ffffff (0x1000000) MS[B]
[1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0x00100000 - 0x0fffffff (0xff00000) MX[B]E(B)
[3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0x10000000 - 0x1000ffff (0x10000) MX[B]
[7] -1 0x10400000 - 0x10400fff (0x1000) MX[B]
[8] -1 0x50000000 - 0x5fffffff (0x10000000) MX[B]
[9] -1 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[10] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0x00001400 - 0x000014ff (0x100) IX[B]
[16] -1 0x00001000 - 0x0000101f (0x20) IX[B]
[17] -1 0x00001020 - 0x0000102f (0x10) IX[B]
[18] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 0 0x000003c0 - 0x000003df (0x20) IS[B]
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
