That did it, I had used XFree86 -configure before, but I didn't realize it
created a different file, and the new file only had 800x600 in it with 16
bit color, now I have 1280x1024 with 24bit running with a better refresh
rate than i was getting in windws, thanks a lot!

-Eric

On Tue, 30 Oct 2001, Robert Weiler wrote:

> I have a Radeon, not a rage 128,  but it works fine.
>
> Try
>
> XFree86 -configure
>
> instead of XF86config
>
>
> The resulting config file should be put in
>
> /etc/X11/XF86Config-4
>
> Bob
>
>
> Eric DeLabar wrote:
>
> >I just totally deleted windows and I'm going linux all the way, I have
> >redhat 7.1 running with XFree86 4.1.0 that I installed from the ftp site
> >(not redhat).  I'm running the 2.4.12 kernel and I have the agp option
> >installed, and support for the rage 128 installed as part of the kernel.
> >My monitor is a Dell 1726T-HS (H:30-85kHz; V:48-150Hz) which worked on
> >windows with the Rage fury pro at 1280x1024 with 24bit color and a refresh
> >in the high 70's, but I don't remember exactly.  Exact specs for the
> >monitor are available here (http://docs.us.dell.com/docs/dta/97793/1.htm).
> >I would like to run X with similar settings, because resolution is the
> >main reason I bought the rage card to begin with.  When I run xf86config,
> >I put in the frequencies I listed above, selected the ATI Rage 128 driver
> >(r128, #36), set the video ram to 32MB (32768kb) set the resolution to
> >1280x1024, default color to 24 bit, and run it, but it always, no matter
> >what settings I play with comes up with 640x480 at what I can only guess
> >is 16 bit color.  I can't switch modes, because <ctrl><alt><+> and
> ><ctrl><alt><-> don't work.  It's seems almost as if X is totally ignoring
> >my XF86Config altogether.  Anybody have a similar experience and hopefully
> >a solution?  I really don't want to switch back to windows...
> >
> >Thanks in advance,
> >
> >-Eric DeLabar
> >[EMAIL PROTECTED]
> >
> >_______________________________________________
> >Newbie mailing list
> >[EMAIL PROTECTED]
> >*** To unsubscribe , or change message options, see:
> >http://XFree86.Org/mailman/listinfo/newbie
> >
> >
>
>
>
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
>

_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie

Reply via email to