Thank you for responding to my request.
I boot to login command prompt, i.e. no X interface.
Yes, I'm using the stock RH7.2 X. It's a clean machine. I bought a new board
last Friday and loaded standard RH7.2 on a new disk. The motherboard had an
onboard SIS630 video chipset.
I was having difficulty getting that chipset to work with my monitor. Both
XFree86 --configure, xf86config and Xconfigurator were all giving differnet
results, none of which would produce any viewable screen content. However,
there was a lot of horizontal interfierance lines on the screen (i.e. edge
borders were jaged, which I assume to mean that the horizontal sync was not
correct, even though I had inserted the correct values during configuration and
the correct values where inserted in the /etc/X11/XF86Config file.)
I did some investigating by going to the Xfree86 site too look at the status
docs for the SIS630 drivers and also to the SIS web site to see if they had
anything. There were a number of patches of older version of X, i.e. 3.??? and
4.0????. I was using 4.1.0-3 on the new machine.
I also noticed that they made an explicit recommendation to confi the onboard
memory for the card (i.e. the shadow ram) to 4096K only! My new board could
only go down to 8MB. I then decided to buy another card, the ATI. The
configuration process always produced the 320x204 res screen, with no virtual
scrolling, i.e. the screen res was set to 320x204 without any mechanism to move
through the virtual window. ctrl-alt-(+|-) keystrokes didn't work, yet they
worked for the other config???????? Ah!!!!
An aside...... (I'm also having network problems between these machines so
providing config files is somewhat slow).
I have included three txt files with this e-mail, XF86Config.txt,
XF86Config-4.txt and XFree86-log.txt, i.e. the two config file produce by
Xconfigurator and the log file from X.
Apparently others are experiencing similar problems with the config files that
Xconfigurator generates.
Thank you for any help you may be able to provide.
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 27, 2001 7:16 PM
Subject: Re: [Newbie]Red Hat 7.2 ATI Rage II+ 215GTB - XFree 4.1.0-3 320x204
resolution
> Lou,
>
> For your box, are you going into init3 or init5 when you boot up? Also sounds
like you're using the XFree86 that normally comes with Red Hat 7.2. Your video
card probably has between 8192 or 4096 for a VideoRam setting within your
XF86Config file within /etc/X11/.
>
> Sometimes its easier to do your editing of the XF86Config file when you're
booting up into init 3. Hopefully some of this helps out.
>
>
> Lee
>
>
> _______________________________________________
> Newbie mailing list
> [EMAIL PROTECTED]
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
>
# File generated by XConfigurator.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Protocol "Xqueue"
AutoRepeat 500 5
# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
#ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Xleds 1 2 3
#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:
LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc101)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "Microsoft"
Device "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Emulate3Buttons
Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5, 35.15, 35.5
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
# 1024x480 for certain Vaios
Modeline "1024x480" 65 1024 1032 1176 1344 480 491 493 525 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x960 @ 60 HzModeline "1280x960" 108 1280 1376 1488 1800 960 961 964 1000
+HSync +VSync
# 1280x960 @ 85 HzModeline "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011
+HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960 1050 1051 1054 1100 +HSync +VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Generic VGA"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by Xconfigurator:
Section "Device"
Identifier "My Video Card"
VendorName "Unknown"
BoardName "Unknown"
#VideoRam 4096
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
Device "Generic VGA"
#Device "My Video Card"
Monitor "My Monitor"
Subsection "Display"
Depth 8
#Modes (null)
ViewPort 0 0
EndSubsection
EndSection
# The 16-color VGA server
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "My Monitor"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "My Monitor"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
# I128, and S3V)
Section "Screen"
Driver "accel"
Device "My Video Card"
Monitor "My Monitor"
DefaultColorDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# XFree86 4.0 configuration generated by Xconfigurator
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# By default, Red Hat Linux 6.0 and later use xfs
Section "Files"
FontPath "unix/:7100"
EndSection
# Module loading section
Section "Module"
Load "dbe" # Double-buffering
Load "GLcore" # OpenGL support
Load "dri" # Direct rendering infrastructure
Load "glx" # OpenGL X protocol interface
Load "extmod" # Misc. required extensions
Load "v4l" # Video4Linux
# Load "pex5" # PHIGS for X 3D environment (obsolete)
# Load "record" # X event recorder
# Load "xie" # X Image Extension (obsolete)
# You only need the following two modules if you do not use xfs.
# Load "freetype" # TrueType font handler
# Load "type1" # Adobe Type 1 font handler
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "Microsoft"
Option "Emulate3Buttons" "on"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "My Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 31.5, 35.15, 35.5
VertRefresh 50-90
Option "dpms"
EndSection
Section "Device"
Identifier "My Video Card"
Driver "ati"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "My Video Card"
Monitor "My Monitor"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF]
Build Host: stripples.devel.redhat.com
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Nov 27 11:49:31 2001
(++) Using config file: "/root/XF86Config.new"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0730 card 0000,0000 rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0008 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0900 card 1039,0900 rev 82 class 02,00,00 hdr 00
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:01:6: chip 1039,7013 card 1039,7013 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0b:0: chip 1002,4755 card 1002,4755 rev 9a class 03,00,00 hdr 00
(II) PCI: 01:00:0: chip 1039,6300 card 1039,6300 rev 31 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1: bridge is at (0:1:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x06 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xcfe00000 - 0xcfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xbdc00000 - 0xcdcfffff (0x10100000) MX[B]
(--) PCI:*(0:11:0) ATI Mach64 GU rev 154, Mem @ 0xce000000/24, 0xcfffe000/12, I/O @
0xd800/8, BIOS @ 0xcffc0000/17
(--) PCI: (1:0:0) SiS 630 rev 49, Mem @ 0xc0000000/27, 0xcfee0000/17, I/O @ 0x9c00/7
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[1] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[2] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[3] -1 0xcfffa000 - 0xcfffafff (0x1000) MX[B]
[4] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[5] -1 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B)
[6] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B](B)
[7] -1 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[8] -1 0x0000d000 - 0x0000d07f (0x80) IX[B]
[9] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[10] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[11] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[12] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[13] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[1] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[2] -1 0x00009c00 - 0x00009c7f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[1] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[2] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[3] -1 0xcfffa000 - 0xcfffafff (0x1000) MX[B]
[4] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[5] -1 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B)
[6] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B](B)
[7] -1 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[8] -1 0x0000d000 - 0x0000d07f (0x80) IX[B]
[9] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[10] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[11] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[12] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[13] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[1] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[2] -1 0x00009c00 - 0x00009c7f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[6] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[7] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[8] -1 0xcfffa000 - 0xcfffafff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[10] -1 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B)
[11] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B](B)
[12] -1 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[13] -1 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[14] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x0000d000 - 0x0000d07f (0x80) IX[B]
[18] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[19] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[20] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[21] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[22] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[23] -1 0x00009c00 - 0x00009c7f (0x80) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 6.3.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
ATI Radeon Mobility LZ (AGP)
(II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326,
SIS300, SIS630, SIS540
(II) Primary Device is: PCI 00:0b:0
(II) ATI: Candidate "Device" section "Card0".
(II) ATI: Shared PCI/AGP Mach64 in slot 0:11:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 0:11:0 assigned to active "Device" section
"Card0".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[6] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[7] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[8] -1 0xcfffa000 - 0xcfffafff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[10] -1 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B)
[11] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B](B)
[12] -1 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[13] -1 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[14] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x0000d000 - 0x0000d07f (0x80) IX[B]
[18] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[19] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[20] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[21] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[22] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[23] -1 0x00009c00 - 0x00009c7f (0x80) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 6.3.6
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(--) Chipset SIS630 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[6] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[7] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[8] -1 0xcfffa000 - 0xcfffafff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[10] -1 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B)
[11] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B](B)
[12] -1 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[13] -1 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[14] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x0000d000 - 0x0000d07f (0x80) IX[B]
[18] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[19] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[20] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[21] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[22] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[23] -1 0x00009c00 - 0x00009c7f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[6] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[7] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[8] -1 0xcfffa000 - 0xcfffafff (0x1000) MX[B]
[9] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[10] -1 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B)
[11] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B](B)
[12] -1 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[13] -1 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[14] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[15] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] 1 0x000a0000 - 0x000affff (0x10000) MS[B]
[19] 1 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[20] 1 0x000b8000 - 0x000bffff (0x8000) MS[B]
[21] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0x0000d000 - 0x0000d07f (0x80) IX[B]
[24] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[25] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[26] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[27] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[28] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[29] -1 0x00009c00 - 0x00009c7f (0x80) IX[B](B)
[30] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[31] 0 0x000003c0 - 0x000003df (0x20) IS[B]
[32] 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 1 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(==) ATI(0): Chipset: "ati".
(==) ATI(0): Depth 8, (==) framebuffer bpp 8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 2.0
(II) ATI(0): VESA VBE Total Mem: 4096 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): VESA VBE OEM Software Rev: 1.0
(II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) ATI(0): VESA VBE OEM Product: MACH64GT
(II) ATI(0): VESA VBE OEM Product Rev: 01.00
(II) ATI(0): VESA VBE DDC supported
(II) ATI(0): VESA VBE DDC Level none
(II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
(II) ATI(0): VESA VBE DDC read failed
(--) ATI(0): ATI 3D Rage II+DVD graphics controller detected.
(--) ATI(0): Chip type 4755 "GU", version 2, foundry UMC, class 0, revision 0x02.
(--) ATI(0): PCI bus interface detected; block I/O base is 0xD800.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is PseudoColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0xCE3FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xCE000000.
(!!) ATI(0): Virtual resolutions will be limited to 4095 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xCFFFE400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xCFFFE000.
(==) ATI(0): Write-combining range (0xce000000,0x400000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 4096 kB of Pseudo-EDO DRAM detected (using 4095 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(WW) ATI(0): Monitor0: Using default hsync range of 28-33kHz
(WW) ATI(0): Monitor0: using default vrefresh range of 43-72Hz
(II) ATI(0): Maximum clock: 200.00 MHz
(II) ATI(0): Not using default mode "640x350" (hsync out of range)
(II) ATI(0): Not using default mode "640x400" (hsync out of range)
(II) ATI(0): Not using default mode "720x400" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1400x1050" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (hsync out of range)
(--) ATI(0): Virtual size is 640x480 (pitch 640)
(**) ATI(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(==) SIS(1): Depth 8, (==) framebuffer bpp 8
(==) SIS(1): Default visual is PseudoColor
(==) SIS(1): Using gamma correction (1.0, 1.0, 1.0)
(==) SIS(1): Using HW cursor
(==) SIS(1): PCI retry enabled
(==) SIS(1): Fast VRAM enabled
(==) SIS(1): TurboQueue enabled
(--) SIS(1): Detected DRAM type : SDRAM
(--) SIS(1): Detected memory clock : 83.521MHz
(--) SIS(1): Detected VRAM bus width is 64
(--) SIS(1): Linear framebuffer at 0xC0000000
(--) SIS(1): MMIO registers at 0xCFEE0000
(--) SIS(1): Relocate IO registers at 0x9C00
(--) SIS(1): VideoRAM: 8192 KB
Total Adapter Bandwidth is 668.168M
CRT1 Used Bandwidth is 334.084M
(==) SIS(1): Min pixel clock is 16 MHz
(--) SIS(1): Max pixel clock is 231 MHz
(WW) SIS(1): Monitor1: Using default hsync range of 28-33kHz
(WW) SIS(1): Monitor1: using default vrefresh range of 43-72Hz
(II) SIS(1): Clock range: 16.25 to 231.81 MHz
(II) SIS(1): Not using default mode "640x350" (hsync out of range)
(II) SIS(1): Not using default mode "640x400" (hsync out of range)
(II) SIS(1): Not using default mode "720x400" (hsync out of range)
(II) SIS(1): Not using default mode "640x480" (hsync out of range)
(II) SIS(1): Not using default mode "640x480" (hsync out of range)
(II) SIS(1): Not using default mode "640x480" (hsync out of range)
(II) SIS(1): Not using default mode "800x600" (hsync out of range)
(II) SIS(1): Not using default mode "800x600" (hsync out of range)
(II) SIS(1): Not using default mode "800x600" (hsync out of range)
(II) SIS(1): Not using default mode "800x600" (hsync out of range)
(II) SIS(1): Not using default mode "800x600" (hsync out of range)
(II) SIS(1): Not using default mode "1024x768" (hsync out of range)
(II) SIS(1): Not using default mode "1024x768" (hsync out of range)
(II) SIS(1): Not using default mode "1024x768" (hsync out of range)
(II) SIS(1): Not using default mode "1024x768" (hsync out of range)
(II) SIS(1): Not using default mode "1024x768" (hsync out of range)
(II) SIS(1): Not using default mode "1152x864" (hsync out of range)
(II) SIS(1): Not using default mode "1280x960" (hsync out of range)
(II) SIS(1): Not using default mode "1280x960" (hsync out of range)
(II) SIS(1): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(1): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(1): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(1): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(1): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(1): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(1): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(1): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(1): Not using default mode "1792x1344" (hsync out of range)
(II) SIS(1): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) SIS(1): Not using default mode "1856x1392" (hsync out of range)
(II) SIS(1): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) SIS(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(1): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(1): Not using default mode "1400x1050" (hsync out of range)
(II) SIS(1): Not using default mode "1400x1050" (hsync out of range)
(--) SIS(1): Virtual size is 640x480 (pitch 640)
(**) SIS(1): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) SIS(1): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(==) SIS(1): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.4
(II) SIS(1): Accel Enable
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Reloading /usr/X11R6/lib/modules/libxaa.a
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SIS(1): initializing int10
(EE) SIS(1): Cannot read V_BIOS
(II) do I need RAC? Yes, I do.
(II) LoadModule: "rac"
(II) Loading /usr/X11R6/lib/modules/librac.a
(II) Module rac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) resource ranges after preInit:
[0] 1 0xcfee0000 - 0xcfefffff (0x20000) MX[B]
[1] 1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
[2] 0 0xcfffe000 - 0xcfffefff (0x1000) MS[B]
[3] 0 0xce000000 - 0xceffffff (0x1000000) MS[B]
[4] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[5] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[6] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[7] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[8] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[9] -1 0xcfffd000 - 0xcfffdfff (0x1000) MX[B]
[10] -1 0xcfffc000 - 0xcfffcfff (0x1000) MX[B]
[11] -1 0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
[12] -1 0xcfffa000 - 0xcfffafff (0x1000) MX[B]
[13] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[14] -1 0xcffc0000 - 0xcffdffff (0x20000) MX[B](B)
[15] -1 0xcfffe000 - 0xcfffefff (0x1000) MX[B](B)
[16] -1 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[17] -1 0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
[18] -1 0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
[19] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[20] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[21] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[22] 1 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[23] 1 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[24] 1 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[25] 1 0x00009c00 - 0x00009c7f (0x80) IX[B]
[26] 0 0x0000d800 - 0x0000d8ff (0x100) IS[B]
[27] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[29] -1 0x0000d000 - 0x0000d07f (0x80) IX[B]
[30] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[31] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[32] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[33] -1 0x0000ff00 - 0x0000ff0f (0x10) IX[B]
[34] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[35] -1 0x00009c00 - 0x00009c7f (0x80) IX[B](B)
[36] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[37] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
[38] 1 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 1 0x000003c0 - 0x000003df (0x20) IS[B]
(==) ATI(0): Write-combining range (0xce000000,0x400000)
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
7 512x512 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(==) SIS(1): Write-combining range (0xc0000000,0x800000)
[drm] failed to load kernel module "agpgart"
[drm] failed to load kernel module "sis"
(II) SIS(1): [drm] drmOpen failed
(EE) SIS(1): [dri] DRIScreenInit failed. Disabling DRI.
(II) SIS(1): Frame Buffer From (0,0) To (640,12278)
(II) SIS(1): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
15 512x512 slots
(==) SIS(1): Backing store disabled
(==) SIS(1): Silken mouse enabled
(II) SIS(1): Using SiS630 HW Xv
(II) SIS(1): direct rendering disabled
(II) Setting vga for screen 1.
Screen 0 is using RAC for io
Screen 1 is using RAC for io
(II) Screen 0 shares io resources
(II) Screen 1 shares io resources
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "auto"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(EE) Mouse0: cannot determine the mouse protocol
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1/, removing from list!
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
(II) Screen 0 shares mem & io resources
(II) Screen 1 shares mem & io resources
