Attached here is the file I think you are referring to... if not, it should use a try... it worked like a charm for me and my colleagues for intel 810 based graphics systems...
It requires u to download 2 files from Intel's site... 1 is a kernel module that needs a little recompilation and the other is an updated X server module... meant for 810. I have both of them but only in rpm format... ..alan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 04, 2001 3:44 PM To: [EMAIL PROTECTED] Subject: [Newbie]XFree86 4.1.0 and intel810 chipset Hello -- >From the number of posts I've seen on usenet, I'm sure this is not a new issue. I've just installed Slackware 8.0 (with XFree86 4.1.0) on a Dell GX110 with the intel810 chipset, and, as many before me, XFree86 is proving difficult to get working. First let me say, for some unknown reason I haven't been able to get to intel's website, so I cannot go take a look at support.intel.com/support/graphics/intel810/linuxsoftware.htm as suggested. I don't know if this is one of the censored sites in China (I have no idea why it might be) but it's been inaccessible to me for hours. Far longer than "normal" commercial website downtime. If anyone has the contents of this page and could send it on, it would be most appreciated. Otherwise, in my XFree86.0.log, I get various lines about "hsync out of range" and even a few "bad mode clock", then the "failed to load kernel module i810" and finally "Fatal server error: AddScreen / ScreenInit failed for driver 0". Most posts on usenet seem to indicate that XFree86 3.3.6 (pardon me if that version number is wrong) would correct this problem. Therefore, I thought I was in the clear with 4.1.0. Could someone please tell me if I still need to re-compile something to include support for the i810? Many thanks, Susan Rajnic [EMAIL PROTECTED] _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
Release Notes.ZIP
Description: Binary data
