On Fri, Dec 28, 2001 at 11:30:50AM -0600, Zsolt Domokos wrote:
> I am still struggling, close to the point of giving it up.
>
> I have an ATI Rage Fury AGP 32MB video card. No matter what I do, I can not
> get the horizontal and vertical synchronization right. I have a KDS AV-7T
> monitor. I tried to install Mandrake 8.1, and Redhat 7.2. I tried different
> resolution and color depth settings, nothing seemed to work. The monitors
> hsych range is 30-70, vsynch is 50-120. With the settings I tried both h and
> vsynch is under the limit, so on my clever monitor I can see at little
> monitor message saying that the h and v synch is out of range.
>
> I don't have a home network installed, neither an extra video card (yet). So
> I can not run xf86cfg through the network. I thought I have an ordinary
> hardware, the doc says it is supported. I don't quite understand why there
> is a problem with the synchronization. Could it be the bug in the driver? I
> played with ModeLine settings, but it did not help. hsync is alwasy below
> the monitor range. I have used the followings to configure X:
>
> XFree86 -configure
> xf86config
> Xdrake
> Xconfigurator
>
> manual config
>
>
> Any help is appreciated. If anybody has the same card working, it would be
> good to have a look at the XF86Config-4 file.
>
> Thanks.
>
> Zsolt
>
> [EMAIL PROTECTED]
>
I think that this is a problem with your monitor. Why, because I have
successfully used that video card with Redhat 7.0. I believe that
version has XFree86 4.0.1-3, but I'm not sure. Unfortunately, I no
longer have the card. If you have another monitor lying around, even
an old 15' will do, see if you can't get a display on that.
Ian
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
