On Wed, Mar 10, 2010 at 1:24 PM, Nicholas Shanks <[email protected]> wrote: > Hi. > On the main road outside my house there is a central island with a keep-left > bollard at each end, like these: > http://www.streetlightonline.co.uk/tbols_in_collection.htm > The bollard does not obstruct traffic, but would prevent over-wide vehicles > from travelling down this road. > How do I mark this up? > > Furthermore, at the other end of the road there is a deliberate > traffic-calming obstruction on one side of the road, forcing cars to queue > until all traffic travelling in the opposite direction has passed, then pull > out around the bollard and onto the wrong side of the road. Furthermore, > bicycles are permitted to pass the bollard in a straight line without having > to pull out. > Same question.
Sounds like a job for traffic_calming ! http://osmdoc.com/en/tag/traffic_calming/#values http://wiki.openstreetmap.org/wiki/Traffic_calming And access http://osmdoc.com/en/tag/access/#values http://wiki.openstreetmap.org/wiki/Access For the way that is blocked to wide vehicles by bollards, perhaps hgv=no and if the restriction is more specific, perhaps add, maxwidth=width restriction in metres http://osmdoc.com/en/tag/hgv/ For the "pinch", how about a node on the way highway=traffic_calming traffic_calming=choker http://osmdoc.com/en/tag/traffic_calming/#values _______________________________________________ newbies mailing list [email protected] http://lists.openstreetmap.org/listinfo/newbies
