the cylinders are not getting warm. i have check for spark, gas and compression and all needed elements are there but they just dont fire
On Wed, Apr 22, 2009 at 6:39 PM, Kyle Munz <[email protected]> wrote: > When you say non-firing, do you mean the cyls aren't getting warm, or > you've actually pulled the sparkplug out and grounded it to a fin while > bumping the starter to watch for spark? > > -Kyle > > > On Wed, Apr 22, 2009 at 7:50 AM, Brad and Flo Thompson < > [email protected]> wrote: > >> firing order on a 550 is 1 and 4 then 2 and 3. i have already swapped >> coils thinking the same thing. >> >> >> On Wed, Apr 22, 2009 at 6:30 AM, Wahrsuul <[email protected]> wrote: >> >>> >>> Sounds like one of your coils has gone bad. You have 2 coils on the >>> bike, one for each pair of cylinders. Not positive on the 550 which >>> cylinders/coils are paired, but I'm guessing with 2 cylinders dead, >>> that's the first place to look. >>> >>> On Apr 21, 10:53 pm, "[email protected]" <[email protected]> >>> wrote: >>> > im having problems with a none firing cylinders. it is the #1 and #3 >>> > cylinders can someone help >>> >>> >> >> >> > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
