I'll let you know. I do have a parts bike with a good top end. I was weighing
the idea of just swapping the whole top end. If nothing I do have parts but I
hate to take that cam cover off. I'll have to try and save it if I can.
HotrodMamma.
----- Original Message -----
From: Dennis Hammerl
To: [email protected]
Sent: Wednesday, July 29, 2009 10:31 PM
Subject: [Nighthawk Lovers] Re: Broken valve spring...
Let me know what you find. A broken valve spring would be a first for
me. Other than the faulty hydraulic adjuster problem, I've never seen a
cylinder head failure of any sort. If it didn't drop a cylinder at time of
noise, I'd bet on a cam follower. Sure be easier to repair than a valve. Good
luck.
--- On Wed, 7/29/09, Creative Residential Designs
<[email protected]> wrote:
From: Creative Residential Designs <[email protected]>
Subject: [Nighthawk Lovers] Broken valve spring...
To: [email protected]
Date: Wednesday, July 29, 2009, 11:58 PM
I went for a ride on my '83 650 Nighthawk today. It was about 170
miles round trip. Coming back home I heard a noise in my top end. Lucky me, I
was at a town only 20 miles from home. It was a tap, tap, tap. I put some oil
in even though I put some oil in before I left home as it was a bit low still.
I rode it slow for about a block. There was no noise until I put it under
load...tap, tap, tap but not real loud. And then...PING! ping ping ping. I
think I broke a valve spring. I pulled it over. I was riding with Bob so I
jumped on the back of his bike (ARRGGG! I hate the back seat!) and we came back
and got the trailer. I am pulling the cam cover off tomorrow to have a
look-see. Now I have 3 bikes and nothing to ride! My old Harley needs a clutch
and I'm waiting for the clutch lever that was donated to me by a very nice
member of this forum. ;) for the Nighthawk Nightmare project. Between the
generous donation of a tank and that clutch lever from members of this forum I
should at least have one bike to ride again soon! Thanks to the generous
members of this forum for helping me to get a bike on the road again.
HotrodMamma.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---
