Yea, I'll see if that's it.
________________________________ From: Dennis Hammerl <[email protected]> To: [email protected] Sent: Wednesday, September 2, 2009 12:16:53 AM Subject: [Nighthawk Lovers] Re: Starting? Yes, understand the ground from handlebars to frame to battery is through the wiring harness. When a ground is suspect, you do this and if it works, find and fix the real problem. OK with that ? --- On Wed, 9/2/09, Torry Barker <[email protected]> wrote: >From: Torry Barker <[email protected]> >Subject: [Nighthawk Lovers] Re: Starting? >To: [email protected] >Date: Wednesday, September 2, 2009, 12:54 AM > > >So attach a wire to the handlebars and to an engine mounting bolt, just have >the wire connected to the > handlebars not to the starter button, and connect that to an engine mounting > bolt. Am I understanding you right? > > > > ________________________________ From: Dennis Hammerl <[email protected]> >To: [email protected] >Sent: Tuesday, September 1, 2009 10:40:52 PM >Subject: [Nighthawk Lovers] Re: > Starting? > > >May I suggest trying a simple wire from the handlebars to an engine mounting >bolt ? it sounds like a ground issue. Pushing the button should put the >headlight out and activate the solenoid. The most seen failure of a switch >assembly is burning out the light contact. In other words, no headlight. > >--- On Wed, 9/2/09, Weston <[email protected]> wrote: > > >>From: Weston <[email protected]> >>Subject: [Nighthawk Lovers] Starting? >>To: "Nighthawk Motorcycle Lovers!" <[email protected]> >>Date: Wednesday, >> September 2, 2009, 12:13 AM >> >> >> >>I recently bought a used but still working starter button/ kill switch >>assembly due to thinking that the starter button was bad >> and wasn't >>starting my bike, I put the new one on and the same thing happens. >>Headlight will be on, when I hit the starter button the headlight dims >>but nothing happens. I can start my bike by jumping the starter >>solenoid, and the bike will run just fine. Is this problem the starter >>solenoid, is it the start/kill switch assembly, or is it some other >>wiring? >> >> >> > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
