Sure you can send them to me. Thanks man
________________________________ From: Dennis Hammerl <[email protected]> To: [email protected] Sent: Wednesday, September 2, 2009 12:19:21 AM Subject: [Nighthawk Lovers] Re: Starting? Doing that bypasses the solenoid too. Battery to starter. Do you read schematics ? I just sent the diagram to a member. You want it ? --- On Wed, 9/2/09, Torry Barker <[email protected]> wrote: >From: Torry Barker <[email protected]> >Subject: [Nighthawk Lovers] Re: Starting? >To: [email protected] >Date: Wednesday, September 2, 2009, 12:59 AM > > >I've got an 84 650SC, there are wires attached to my clutch. Is that the >clutch switch? I haven't tried starting it with the clutch in so that could be >it, also I am > putting a screwdriver across the two nuts on the starter solenoid to start it. > > > > ________________________________ From: Kyle Munz <[email protected]> >To: [email protected] >Sent: Tuesday, September 1, 2009 10:17:39 PM >Subject: [Nighthawk > Lovers] Re: Starting? > >>What kind of bike do you have? They're all subtly different around the >>starter button. I know my 650 had 4 contact points, the button normally >>closed the circuit driving the headlight, when depressed it broke the circuit >>to the headlight and closed the circuit to the starter relay. Another factor >>is the clutch switch, if the clutch isn't pulled in, or the switch isn't >>working, the relay won't close to power the starter. Depending on where >>you're hotwiring from you might be bypassing this. You just gotta take it >>step by step. > >-Kyle > > > >On Tue, Sep 1, 2009 at 11:13 PM, Weston <[email protected]> wrote: > > >>>>I recently bought a used but still working starter button/ kill switch >>>>assembly due to thinking that the starter button was bad and wasn't >>>>starting my bike, I put the new one on and the same thing happens. >>>>Headlight will be on, when I hit the starter button the headlight dims >>>>but nothing happens. I can start my bike by jumping the starter >>>>solenoid, and the bike will run just fine. Is this problem the starter >>>>solenoid, is it the start/kill switch assembly, or is it some other >>>>wiring? >> >> > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
