First, Thanks for the response.
The pieces I purchased came from a dealer here in MN (Tousley Motor Sports) and they odered from a company that they used. Both pieces under $20.00 total. The reason I need to remove wiring is that they are hard wired/ soldered right into the bulb receptacle in the front blinker (I was hoping there would be a removable plug here, but no luck). It is the weekend now and have more time to work on the project, so I will attempt to find the source in the area under the headlight. Again- Thanks for the comment, I am excited to tap the combined knowledge of this group as I move on to other projects on my bike. BTW- I received this bike for free 3 years ago from my boss. He hadn't ridden it for 2 or 3 years, so carbs were all gummed up, needed two new tires, battery and front forks repressurized. Had carbs rebuilt and other repairs done and have been happily riding again (after a 30 year hiatus! Originally had 250 Suzuki off-road bike) and loving it. Bike has about 19,000 miles on it and is black) Enjoy the weekend all- On Oct 1, 10:16 pm, oldschoolgwin <[email protected]> wrote: > Why do you need to pull the wiring out? If replacing just the rubber > piece don't you just need to slide the new rubber part on in the same > manner you removed the old one? Maybe i missed the point of the > question? > > Did you buy a Honda OEM part or were you able to find a reasobly > priced after market replacement? > > If aftermarket could you please list the source - I need 4 of them > (but not at the OEM prices). > > Thanks > > On Oct 1, 6:20 pm, Coder <[email protected]> wrote: > > > > > Hi all. > > > I have never posted here before and really am a neophyte relative to > > motorcycle repairs. > > > One of the rubber pieces that hold the turn signal cracked on my bike > > (1984 650 Nighthawk). I have purchased the replacement parts, removed > > the existing rubber piece from the headlight bracket, taken off the > > turn signal cover and removed the bulb, but I am stumped regarding how > > to remove the old wiring and socket (that holds the bulb) from the > > turn signal itself. I am afraid to keep pulling/twisting as I think I > > will damage the wiring and cause a bigger problem than I have. > > > Thanks for any help that you can provide-- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
