for the time/temp, I searched online to see what other people were doing and found the temp varies a lot. Some were as high as 350.Most were 210-250. I chose a lower temp to minimize the risk of damaging the lens.
I used generic craft hot glue. I was didn't know if it would melt when I heated the tail light to reseat the lens, but it didn't On May 15, 2:23 pm, surfswab <[email protected]> wrote: > Now that's thinking outside the box! > > I have been kicking around the idea of doing that very thing, but my > thinking was to cut the plastic housing from the rear and attach the > circuit board inside the lens somehow. Yours is a much more elegant > solution. > > How'd you come up with the time/temperature in the oven? I would've > thought that much heat would either melt the plastic or damage the LED > circuitry. > > Did you use any particular type hot glue to attach the clusters, or > just the generic crafts store variety? > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
