Yes man, is very easy. You don't even need to take the brake caliper off. Make sure the wheel is off the ground first.
Javier. On Thu, Mar 31, 2011 at 11:06 AM, Allen Thomas <[email protected]>wrote: > Super easy just loosen the 4 pinch bolts, then remove the big nut on the > left side (looking from front) then use a phillips screw driver to > twist/pull the axle shaft out. > > Sent via BlackBerry by AT&T > ------------------------------ > *From: * MrViggy <[email protected]> > *Sender: * [email protected] > *Date: *Thu, 31 Mar 2011 08:31:44 -0600 > *To: *<[email protected]> > *ReplyTo: * [email protected] > *Subject: *[Nighthawk Lovers] Speedo cable? > > Hey all, > > I have an '84 700SC and during the winter I noticed what appeared to be a > leak around the front left brake caliper. After some investigation this > past weekend, I've ruled out the brakes, but it looks like the grease stain > is coming from the speed cable or the bearings. How easy (or difficult) is > it to pull the front wheel and check the bearings? > > Viggy > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
