Thanks!!! Viggy
On Thu, Mar 31, 2011 at 9:20 AM, Javier Garcia <[email protected]> wrote: > Yes man, is very easy. You don't even need to take the brake caliper off. > Make sure the wheel is off the ground first. > > Javier. > > > On Thu, Mar 31, 2011 at 11:06 AM, Allen Thomas <[email protected]>wrote: > >> Super easy just loosen the 4 pinch bolts, then remove the big nut on the >> left side (looking from front) then use a phillips screw driver to >> twist/pull the axle shaft out. >> >> Sent via BlackBerry by AT&T >> ------------------------------ >> *From: * MrViggy <[email protected]> >> *Sender: * [email protected] >> *Date: *Thu, 31 Mar 2011 08:31:44 -0600 >> *To: *<[email protected]> >> *ReplyTo: * [email protected] >> *Subject: *[Nighthawk Lovers] Speedo cable? >> >> Hey all, >> >> I have an '84 700SC and during the winter I noticed what appeared to be a >> leak around the front left brake caliper. After some investigation this >> past weekend, I've ruled out the brakes, but it looks like the grease stain >> is coming from the speed cable or the bearings. How easy (or difficult) is >> it to pull the front wheel and check the bearings? >> >> Viggy >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to [email protected]. >> To unsubscribe from this group, send email to >> [email protected]. >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
