I was at bld  2 too, but now we were all moved to a new one, blg 34. Bld 2
was closed and no one works there anymore. What is your father's name?
Javier.

On Fri, Aug 5, 2011 at 12:13 PM, paul annen <[email protected]> wrote:

> kewl, my dads office is in BLG 2... but right now hes out at the laser
> ranging site alot....
>
> my GL had its factory alt replaced with a small automotive single wire
> alt... think its a 30 amp made by dewoo... so i cant be much help
>
>
> On Fri, Aug 5, 2011 at 12:03 PM, Javier Garcia <[email protected]>wrote:
>
>> Ok guys, Allen being checking the electrical system of the GW and we don't
>> fully understand what is going on yet.  The PO replaced both the stator and
>> rectifier, and said that still the battery wasn't getting charge. We checked
>> the new rectifier and actually it seems to be a bad. We check the old one
>> (which he gave us), and we are getting around 3.5 Ohms of resistance between
>> diodes (between the yellow to the red or between the green to the yellow).
>> We don't really don't if this is the right resistance, but at least is
>> consistent. The thing is that with the old rectifier the charging voltage to
>> the battery while running the engine is above 16 volts, which seems to be a
>> lot. I am wondering if any of you guys GW owners have measure this numbers
>> and how much are you getting?
>>
>> Javier.
>>
>> PS: Yeti yes, I work at goddard.
>>
>> On Fri, Aug 5, 2011 at 11:07 AM, paul annen <[email protected]>wrote:
>>
>>> javier, you dont happen to work at goddard do you?
>>> yeti
>>>
>>>
>>> On Fri, Aug 5, 2011 at 10:55 AM, Graham Rogers <[email protected]> wrote:
>>>
>>>> Javier didn't get to work for NASA because he had a green card ....
>>>>
>>>> On Aug 5, 2011, at 10:19 AM, Allen Thomas wrote:
>>>>
>>>> I'm already at his house. Lol.
>>>>
>>>> Sent via BlackBerry by AT&T
>>>> ------------------------------
>>>> *From: * Graham Rogers <[email protected]>
>>>> *Sender: * [email protected]
>>>> *Date: *Fri, 5 Aug 2011 10:09:47 -0400
>>>> *To: *<[email protected]>
>>>> *ReplyTo: * [email protected]
>>>> *Subject: *Re: [Nighthawk Lovers] Tail bag
>>>>
>>>> and then give the job to Allen ....  Graham
>>>>
>>>> On Aug 5, 2011, at 9:34 AM, Javier Garcia wrote:
>>>>
>>>> Yeti,
>>>> is a '84, and yes, I have heard about how difficult is to take the carbs
>>>> out of a GW. That is why I will start with lots and lots of seafoam ;-)
>>>> Javier.
>>>>
>>>> On Fri, Aug 5, 2011 at 9:07 AM, paul annen <[email protected]>wrote:
>>>>
>>>>> thats an awsome looking bike.. and yes that is the GL logo... what year
>>>>> is that bike? side says its a 1200, so it should be the same engine i have
>>>>> in my wing.. i will tell you now that the carbs are a PITA to pull so they
>>>>> can be cleaned...
>>>>>
>>>>>
>>>>> On Thu, Aug 4, 2011 at 10:29 PM, Allen Thomas 
>>>>> <[email protected]>wrote:
>>>>>
>>>>>> Javier, here are some links about fixing your sight glass woes.
>>>>>>
>>>>>>
>>>>>> http://www.goldwingfacts.com/forums/view_topic.php?id=12967&forum_id=1&highlight=leaking+master+glass
>>>>>>
>>>>>> http://www.northamericangoldwings.com/view_topic.php?id=9438&forum_id=25
>>>>>>
>>>>>> Glass lenses:
>>>>>> http://www.ofrei.com/page_176.html
>>>>>>
>>>>>> An actual kit:
>>>>>> http://newrivercyclesalvage.com/sight-glass.html
>>>>>>
>>>>>> BTW are you working on her tomorrow?
>>>>>>
>>>>>> On Thu, Aug 4, 2011 at 8:59 PM, Javier Garcia <[email protected]>wrote:
>>>>>>
>>>>>>> James,
>>>>>>> I believe that is the GW logo.
>>>>>>>
>>>>>>> Graham,
>>>>>>>
>>>>>>> it is a 1984, with 25k miles on it. Paint is not perfect but in
>>>>>>> pretty good condition for the age, as well as the chrome (some rust 
>>>>>>> here and
>>>>>>> there). New tires, brake pads, stator and regulator. I guess battery is 
>>>>>>> also
>>>>>>> recent. Came with a rack and hard case trunk, owners and Clymer 
>>>>>>> manuals. I
>>>>>>> paid $850 for it.
>>>>>>>
>>>>>>> Clearly it haven't been ridden too much, so carbs need serious
>>>>>>> cleaning. Also, it has an electrical issue so the battery doesn't get
>>>>>>> charge. Hopefully is some bad ground somewhere, and I hope to find a 
>>>>>>> quick
>>>>>>> solution with Allen's help. For the carbs I will start running tons of
>>>>>>> seafoam to see how it goes. I took it for a spin around the block. Ran
>>>>>>> crappy but it didn't die. I will probably have to replace both the 
>>>>>>> master
>>>>>>> cylinder front brake and clutch, since they are leaking fluid thought 
>>>>>>> the
>>>>>>> sight windows. One of the brakes is probably locked because is kind of 
>>>>>>> hard
>>>>>>> to move it on neutral.
>>>>>>>
>>>>>>> Hopefully will be road ready soon. Here are some more pics.
>>>>>>>
>>>>>>> Javier.
>>>>>>>
>>>>>>>
>>>>>>> On Thu, Aug 4, 2011 at 8:39 PM, James O'Gorman 
>>>>>>> <[email protected]>wrote:
>>>>>>>
>>>>>>>> Yeah, what is the logo in your seat? Is that transformers?
>>>>>>>>
>>>>>>>> On Aug 4, 2011, at 5:18 PM, Graham Rogers wrote:
>>>>>>>>
>>>>>>>> > Nice GW Javier, - details??   Graham
>>>>>>>> >
>>>>>>>> > On Aug 4, 2011, at 7:44 PM, Javier Garcia wrote:
>>>>>>>> >
>>>>>>>> >> Hey Paul,
>>>>>>>> >>
>>>>>>>> >> some time ago I promised you some pictures of a new tail bag I
>>>>>>>> got put on my NH. I figured out that it will help you even more if I 
>>>>>>>> will
>>>>>>>> get a bike just like yours so you can really see how it look like. So, 
>>>>>>>> here
>>>>>>>> it is.
>>>>>>>> >> What do you think?
>>>>>>>> >>
>>>>>>>> >> Javier.
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> --
>>>>>>>> >> You received this message because you are subscribed to the
>>>>>>>> Google Groups "Nighthawk Motorcycle Lovers!" group.
>>>>>>>> >> To post to this group, send email to
>>>>>>>> [email protected].
>>>>>>>> >> To unsubscribe from this group, send email to
>>>>>>>> [email protected].
>>>>>>>> >> For more options, visit this group at
>>>>>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>>>>> >> <Photo094.jpg><Photo096.jpg><Photo097.jpg><Photo102.jpg>
>>>>>>>> >
>>>>>>>> > --
>>>>>>>> > You received this message because you are subscribed to the Google
>>>>>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>>>>>> > To post to this group, send email to
>>>>>>>> [email protected].
>>>>>>>> > To unsubscribe from this group, send email to
>>>>>>>> [email protected].
>>>>>>>> > For more options, visit this group at
>>>>>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>>>>> >
>>>>>>>>
>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>>>>>> To post to this group, send email to
>>>>>>>> [email protected].
>>>>>>>> To unsubscribe from this group, send email to
>>>>>>>> [email protected].
>>>>>>>> For more options, visit this group at
>>>>>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>>>>> To post to this group, send email to
>>>>>>> [email protected].
>>>>>>> To unsubscribe from this group, send email to
>>>>>>> [email protected].
>>>>>>> For more options, visit this group at
>>>>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>>>> To post to this group, send email to
>>>>>> [email protected].
>>>>>> To unsubscribe from this group, send email to
>>>>>> [email protected].
>>>>>> For more options, visit this group at
>>>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>>> To post to this group, send email to [email protected]
>>>>> .
>>>>> To unsubscribe from this group, send email to
>>>>> [email protected].
>>>>> For more options, visit this group at
>>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>>
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>> To post to this group, send email to [email protected].
>>>> To unsubscribe from this group, send email to
>>>> [email protected].
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>
>>>>
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>> To post to this group, send email to [email protected].
>>>> To unsubscribe from this group, send email to
>>>> [email protected].
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>> To post to this group, send email to [email protected].
>>>> To unsubscribe from this group, send email to
>>>> [email protected].
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>
>>>>
>>>>  --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Nighthawk Motorcycle Lovers!" group.
>>>> To post to this group, send email to [email protected].
>>>> To unsubscribe from this group, send email to
>>>> [email protected].
>>>> For more options, visit this group at
>>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>>
>>>
>>>  --
>>> You received this message because you are subscribed to the Google Groups
>>> "Nighthawk Motorcycle Lovers!" group.
>>> To post to this group, send email to [email protected].
>>> To unsubscribe from this group, send email to
>>> [email protected].
>>> For more options, visit this group at
>>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>>
>>
>>  --
>> You received this message because you are subscribed to the Google Groups
>> "Nighthawk Motorcycle Lovers!" group.
>> To post to this group, send email to [email protected].
>> To unsubscribe from this group, send email to
>> [email protected].
>> For more options, visit this group at
>> http://groups.google.com/group/nighthawk_lovers?hl=en.
>>
>
>  --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.

Reply via email to