Hey Guys! Haven't posted here in a while but I am always lurking around in the shadows, love this group and the interesting discussions.
Let me apologize beforehand for this OT post...but... I have a 91 GMC Sonoma PU that I want to get running and cleaned up to give my son for his 18th birthday and senior year. It has been sitting around doing nothing since 2007 when I got my new to me PU. In Sept 08, I started it, drove it down the street, and filled up the tank. Then I parked it, and haven't moved it since. Well, earlier this summer, I started tinkering around with it to get it running again...bought a new battery and all, but it hasn't started. So I proceeded to clean out the gas lines and TBI/Fuel injector assembly. I put about a gallon of new gas into the tank and a couple of ounces into the TB....and now here is my problem: it only starts and stays on until the fuel in the TB runs out...I even put a little SeaFoam into the TB and it does the same thing. I'm thinking, I need to change the fuel filter, which is under the bed on the drivers side, BUT, was wondering if maybe there is something else I should try before I go through all that trouble. (Changing the fuel filter was one of those things that I'd just rather pay to have done than do it myself). Anyway, I have the Chilton Manual for this truck that I'm going to go review after I post this, but I just wanted to see if anyone here had any suggestions. Thanks for any suggestions and again, I apologize for the OT post. -NghthwkLvr- -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
