Colin, A common mistake when replacing the front wheel is not aligning the tabs on the gear with the speedometer cable. As long the tabs aren't crushed you should be able to realign them with the slots on the cable and get your speedometer working again.
-Kyle On Thu, May 3, 2012 at 12:30 PM, Colin <[email protected]> wrote: > Hi, my name is Colin! I bought a '84 nighthawk 650 s and it is my > first motorcycle! It has 45k on it. I really like the bike. It starts > and runs good. My speedometer doesn't work and the odometer as well. I > figured out how to remove the speedo cable and read on here how to > test the speedo with a cordless drill. If isn't the speedo itself > that's not working, I was thinking it might the sensor on the front > wheel. How big of a job is it to replace this sensor? Looks like I > have to remove the front tire and calipers inorder to get at this > sensor. Any help would be greatly appreciated. Thanks! > - Colin > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
