Kyle I am going to look at that today. Do you suggest i just get new wiring in the back and re do the black/red wirese.
What did you end up doing? maybe the same thing might work for me. By any chance - are you in chicago? Thank you very much, Harishi Message I sent to Graham on the list: 11000 miles. Everything was working. Got service. Oil Change. after couple months of working about 10 days ago - it started flickering once in a while when i would put the key in. At a certain point of me putting the key from locked position to unlock position - it would sometime not start. If I wiggle the key - it will start again. few days ago - that didnt work anymore. It just stopped. I live in Chicago. When i turn the key into park - the back light/break light turns on so i figured the battery is working. Kill switch is on. The problem is that the bike doesnt event register that i am putting the key in. On Jun 6, 8:13 am, Kyle Munz <[email protected]> wrote: > A somewhat common problem with the 650s are electrical issues where the > reb/black wires from the ignition plug in to the back of the fuse block. > I've seen more than one, including mine, that were melted and fused due to > arcing. > > -Kyle > > On Wed, Jun 6, 2012 at 7:34 AM, Graham Rogers > <[email protected]>wrote: > > > > > > > > > Harishi, where are you? Tell us more about the bike, how many miles has it > > done, any pictures? What do you mean by 'you checked the battery and it's > > working?' Have you checked the voltage of the battery? It sounds like a > > ground connection. Make sure the connections to the battery are tight and > > the ground from the negative on the battery to the engine. Be sure your > > kill switch is in the on position, Graham > > > On Jun 6, 2012, at 2:20 AM, H wrote: > > > > Hello Nighthawk lovers, > > > I am new to this group and appreciate any guidance/thoughts about the > > > new bike i just got. > > > I recently bought it and got all the service done on it. > > > > Few days ago, the motorcycle just stopped working. I put the key in > > > the ignition and it lit up and than the connection from the key just > > > stopped. I checked the battery and its working. > > > > I think its either a wiring problem or key ignition problem or fuse > > > problem? > > > > Does anyone have any advise/guidance on what to do? > > > > Thank you very much, > > > > Harishi > > > > -- > > > You received this message because you are subscribed to the Google > > Groups "Nighthawk Motorcycle Lovers!" group. > > > To post to this group, send email to [email protected]. > > > To unsubscribe from this group, send email to > > [email protected]. > > > For more options, visit this group at > >http://groups.google.com/group/nighthawk_lovers?hl=en. > > > -- > > You received this message because you are subscribed to the Google Groups > > "Nighthawk Motorcycle Lovers!" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > >http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
