If you can't get from the top you will have to take off your pipes and drop the oil pan to get to it !
On Sunday, November 9, 2014 5:53:23 PM UTC-8, Harold Bolin wrote: > > I have a 85 700c that had a lot of rattle in the top end so I took the > cams and lifters out and bled the lifters. Somehow the chain got stuck down > inside and I can't get it loose. The engine will not turn over either. i > can't even get it back to the timing mark. The chain is probably 10 inches > to short. I have had the adjuster completly out but it did not help. Any > help would be appreciated. I am doing it by the manual. I did make the > mistake of turning it over by the starter when I was taking the cam gear > bolts out. Thanks > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
