Yes the washers richen the mid range, the pilot screws adjusts the idle to 1/4 throttle. Start with adjusting the pilot mixture so that the bike doesn't pop at idle or load up (rich). Usually that is about 2 1/2 to 3 turns out. Then sync the carbs. After that play with washers and if you feel that you get better roll on power at less than wide open then go up a main jet and remove a washer.
Allen Thomas -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
