Are those the exhaust gaskets? I used a pick, patience, and small, steady applications of brake cleaner when I pulled the ones on the 750. The gaskets are "coked" in there by exhaust soot, so they will resist coming out until you manage to chip a little of that out from behind it.
Once you get that small victory, the rest follows suit pretty well. On Thu, Feb 23, 2017 at 11:55 PM, Javier Garcia <jajgar...@gmail.com> wrote: > Maybe a squirt of PB blaster will work? > > On Thu, Feb 23, 2017 at 4:45 PM, marion branham <marion.branh...@gmail.com > > wrote: > >> I have the set of picks. No way is that thing going to give :) I fought >> it for an hour. Heat has been suggested but I just can not see using a >> torch on the head . I live in South Carolina. And on the sealent for the >> valve cover gasket. It said to put it on the end caps ( half moons ) which >> I did. Am I suppose to seal it all the way around ? These manuals are >> REALLY misleading. >> >> On Thu, Feb 23, 2017 at 6:00 PM, Dave duChêne <duchen...@gmail.com> >> wrote: >> >>> You can buy a "pick" at any automotive supply store (shaped like the >>> letter L). They are very hard and sharp, get in behind the ring and pull it >>> out. >>> Be careful not to damage the aluminum head. >>> Keep us posted. >>> >>> On 23 February 2017 at 18:55, marion branham <marion.branh...@gmail.com> >>> wrote: >>> >>>> No, I didn't put any sealer on them. I have found very little info on >>>> how to do this LOL. The copper gaskets have been in there since 83 I am >>>> thinking. >>>> >>>> On Thu, Feb 23, 2017 at 4:10 PM, Richard Potter <rpot...@anaheim.net> >>>> wrote: >>>> >>>>> Bend the tip of an old screwdriver and try to get it under the gasket >>>>> >>>>> It takes a bit but they will come out >>>>> >>>>> Then clean the head before putting in the new ones >>>>> >>>>> >>>>> >>>>> *From:* nighthawk_lovers@googlegroups.com [mailto: >>>>> nighthawk_lovers@googlegroups.com] *On Behalf Of *Dave duChêne >>>>> *Sent:* Thursday, February 23, 2017 12:24 PM >>>>> *To:* nighthawk_lovers@googlegroups.com >>>>> *Subject:* Re: [Nighthawk Lovers] No way the crush gaskets are coming >>>>> out >>>>> >>>>> >>>>> >>>>> Don't do that, be patient. It takes a bit of practice to learn this >>>>> stuff. >>>>> >>>>> Did you put any type of sealer on the gasket? >>>>> >>>>> >>>>> >>>>> On 23 February 2017 at 15:52, Marion <m...@doonbugg.com> wrote: >>>>> >>>>> Well, I ordered new copper crush gaskets. So while waiting on them to >>>>> get here I decided to go out and " have a go " at getting the old ones >>>>> out. >>>>> They are not moving. The pipes are leaking like hell. Also, I replaced the >>>>> valve cover gasket and it pours out oil LOL. I did the proper sequence and >>>>> torquing of the bolts with new gasket.I think I might be ready to put >>>>> these >>>>> both up for sale. Two bikes ( One parts bike )One with title one without ( >>>>> bought in GA ). any interest ? 1983 550 nighthawk. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "Nighthawk Motorcycle Lovers!" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to nighthawk_lovers+unsubscr...@googlegroups.com. >>>>> To post to this group, send email to nighthawk_lovers@googlegroups.com >>>>> . >>>>> Visit this group at https://groups.google.com/group/nighthawk_lovers. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> If you forward this e-mail please remove my address. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "Nighthawk Motorcycle Lovers!" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to nighthawk_lovers+unsubscr...@googlegroups.com. >>>>> To post to this group, send email to nighthawk_lovers@googlegroups.com >>>>> . >>>>> Visit this group at https://groups.google.com/group/nighthawk_lovers. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> ------------------------------ >>>>> >>>>> THIS MESSAGE IS INTENDED ONLY FOR THE USE OF THE INDIVIDUAL OR ENTITY >>>>> TO WHICH IT IS ADDRESSED AND MAY CONTAIN INFORMATION THAT IS PRIVILEGED, >>>>> CONFIDENTIAL, AND EXEMPT FROM DISCLOSURE UNDER APPLICABLE LAWS. If the >>>>> reader of this message is not the intended recipient, or the employee or >>>>> agent responsible for delivering the message to the intended recipient, >>>>> you >>>>> are hereby notified that any dissemination, distribution, forwarding, or >>>>> copying of this communication is strictly prohibited. If you have received >>>>> this communication in error, please notify the sender immediately by >>>>> e-mail >>>>> or telephone, and delete the original message immediately. Thank you. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "Nighthawk Motorcycle Lovers!" group. >>>>> To unsubscribe from this topic, visit https://groups.google.com/d/to >>>>> pic/nighthawk_lovers/YPsrt4H7cWA/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> nighthawk_lovers+unsubscr...@googlegroups.com. >>>>> To post to this group, send email to nighthawk_lovers@googlegroups.com >>>>> . >>>>> Visit this group at https://groups.google.com/group/nighthawk_lovers. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Nighthawk Motorcycle Lovers!" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to nighthawk_lovers+unsubscr...@googlegroups.com. >>>> To post to this group, send email to nighthawk_lovers@googlegroups.com. >>>> Visit this group at https://groups.google.com/group/nighthawk_lovers. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >>> >>> -- >>> If you forward this e-mail please remove my address. >>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "Nighthawk Motorcycle Lovers!" group. >>> To unsubscribe from this topic, visit https://groups.google.com/d/to >>> pic/nighthawk_lovers/YPsrt4H7cWA/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> nighthawk_lovers+unsubscr...@googlegroups.com. >>> To post to this group, send email to nighthawk_lovers@googlegroups.com. >>> Visit this group at https://groups.google.com/group/nighthawk_lovers. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to nighthawk_lovers+unsubscr...@googlegroups.com. >> To post to this group, send email to nighthawk_lovers@googlegroups.com. >> Visit this group at https://groups.google.com/group/nighthawk_lovers. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to nighthawk_lovers+unsubscr...@googlegroups.com. > To post to this group, send email to nighthawk_lovers@googlegroups.com. > Visit this group at https://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
