Starter motor? On Wed, Oct 18, 2017 at 10:14 PM Dustin Anderson <[email protected]> wrote:
> I recently replaced the spark plugs, exhaust gaskets, rebuilt the clutch > slave, replaced the gear shifter cover gasket, gear shifter linkage seal, > oil pan gasket and the gear indicator seal. No leaks as of right now, but > the motor is having problems turning over after a short ride, due to the > engine being hot. I also noticed that the valve cover on the front, above > the headers is starting to leak and that the engine seems to be hotter. The > CB700 seems to be running better than it did before, but when I stop it > seems to be wanting to not turn over. My question is how does one know if > the exhaust gaskets are sealing properly? Is it just my two year mark on > the battery and time to replace it? > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
