github-actions[bot] commented on PR #8813: URL: https://github.com/apache/texera/pull/8813#issuecomment-5944088616
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 8 worse · ⚪ 5 noise (<±5%) · 0 without baseline > Compared against main `566efb8` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/36952312748) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 375 | 0.229 | 26,559/33,836/33,836 us | 🟢 -7.4% / 🔴 +120.9% | | 🔴 | bs=100 sw=10 sl=64 | 775 | 0.473 | 124,834/177,468/177,468 us | 🔴 +17.9% / 🔴 +69.7% | | ⚪ | bs=1000 sw=10 sl=64 | 917 | 0.56 | 1,088,078/1,150,671/1,150,671 us | ⚪ within ±5% / 🔴 -16.3% | <details><summary>Baseline details</summary> Latest main `566efb8` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 375 tuples/sec | 403 tuples/sec | 829.66 tuples/sec | -6.9% | -54.8% | | bs=10 sw=10 sl=64 | MB/s | 0.229 MB/s | 0.246 MB/s | 0.506 MB/s | -6.9% | -54.8% | | bs=10 sw=10 sl=64 | p50 | 26,559 us | 24,895 us | 12,230 us | +6.7% | +117.2% | | bs=10 sw=10 sl=64 | p95 | 33,836 us | 36,537 us | 15,320 us | -7.4% | +120.9% | | bs=10 sw=10 sl=64 | p99 | 33,836 us | 36,537 us | 18,789 us | -7.4% | +80.1% | | bs=100 sw=10 sl=64 | throughput | 775 tuples/sec | 823 tuples/sec | 1,070 tuples/sec | -5.8% | -27.6% | | bs=100 sw=10 sl=64 | MB/s | 0.473 MB/s | 0.503 MB/s | 0.653 MB/s | -6.0% | -27.6% | | bs=100 sw=10 sl=64 | p50 | 124,834 us | 117,138 us | 97,964 us | +6.6% | +27.4% | | bs=100 sw=10 sl=64 | p95 | 177,468 us | 150,479 us | 104,605 us | +17.9% | +69.7% | | bs=100 sw=10 sl=64 | p99 | 177,468 us | 150,479 us | 113,908 us | +17.9% | +55.8% | | bs=1000 sw=10 sl=64 | throughput | 917 tuples/sec | 926 tuples/sec | 1,096 tuples/sec | -1.0% | -16.3% | | bs=1000 sw=10 sl=64 | MB/s | 0.56 MB/s | 0.565 MB/s | 0.669 MB/s | -0.9% | -16.3% | | bs=1000 sw=10 sl=64 | p50 | 1,088,078 us | 1,083,600 us | 963,379 us | +0.4% | +12.9% | | bs=1000 sw=10 sl=64 | p95 | 1,150,671 us | 1,123,861 us | 1,001,808 us | +2.4% | +14.9% | | bs=1000 sw=10 sl=64 | p99 | 1,150,671 us | 1,123,861 us | 1,029,482 us | +2.4% | +11.8% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,533.99,200,128000,375,0.229,26558.92,33835.62,33835.62 1,100,10,64,20,2580.80,2000,1280000,775,0.473,124834.19,177468.24,177468.24 2,1000,10,64,20,21812.67,20000,12800000,917,0.560,1088077.93,1150670.52,1150670.52 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
