https://bugs.freedesktop.org/show_bug.cgi?id=38074
--- Comment #6 from Jaromír Cápík <[email protected]> 2011-07-28 10:21:44 PDT --- I did one more test. I found an analog cable for the second fullhd monitor and connected it via the DVI-I to D-SUB converter. Both monitors worked well! So ... You were right. The nouveau driver cannot drive the second digital output (DVI-I-2), but can drive the analog part of the DVI-I-2 output. Here's the xrandr output (not sure if it is needed, but .... anyway) Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192 DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 50.0 1600x1200 60.0 1680x1050 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1280x800 59.8 1152x864 75.0 1280x720 50.0 60.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 720x400 70.1 DVI-I-2 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1600x1200 60.0 1680x1050 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
