https://bugs.freedesktop.org/show_bug.cgi?id=38074
--- Comment #9 from Ben Skeggs <[email protected]> 2011-07-28 15:56:01 PDT --- (In reply to comment #5) > > That means ... DVI-I-1 always works, DVI-I-2 never works Okay. That's interesting to know. There's nothing too immediately obvious as to why that'd be the case so far.. (In reply to comment #7) > I'm just guessing... it seems that the driver was tuned/developed for > variations of cards, which had 1xDVI and 1xDSUB connector and thus two DVI > outputs were not expected. No, that's definitely supposed to work. This problem is a board-specific problem, and not a general issue with nouveau. Okay. Can you get me 2 logs. Firstly, can you plug a single display into the working port and boot with "log_buf_len=1M drm.debug=15 nouveau.reg_debug=0x400 3", and save the dmesg output. Then, can you plug a single display into the non-working port and ssh (or blindly login) and grab the dmesg output from that also. Can you also attach your vbios image, which can be retrieved by: mount -t debugfs debugfs /sys/kernel/debug And the vbios (if nouveau is loaded) will be accessible at /sys/kernel/debug/dri/0/vbios.rom. -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
