--- In [email protected], "cyberscan" <k...@...> wrote: > > > > --- In [email protected], "bwolodko" <ben.wolodko@> wrote: > > > > --- In [email protected], "cyberscan" kurt@ wrote: > > > > > > Can someone help me configure an SD card to auto boot my NSbasic app > on power up? I'm running WinCE 5.0. Thanks. > > > > > > > Depending on the target device, place your NSBasic generated EXE file > ( only one ) into a folder named AutoRun > > > > On the CuWin3500 the SD card is presented as > > > > Storage Card > > > > so if I place an EXE file ( only one ) in the > > > > Storage Card\Autorun > > > > folder, it will run upon booting as long as the Autorun dip switch is > set to enable. > > > > Other hardware will have it's own protocols for Autorun > > > > On the CuWin3500 there is a dip switch that has to be set to enable > the Autorun feature. > > > Thanks. When I try that, it comes up with an error "Cannot find > NSBasic.exe. Please reinstall." Do I need to put NSBasic.exe somewhere? >
You have to install the NSBasic runtime onto the target device, the NSBasic Installer should be doing this. Typically the NSBasic Runtime is copied to the target into the Flash Disk\Windows subdirectory, and then you have to "Save Registry" after copying/installing to that location. I am currently using NSBasic 7.05c, not version 8.02. George may have to jump in here. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "nsb-ce" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en -~----------~----~----~----~------~----~------~--~---
