--- In [email protected], "bwolodko" <ben.wolo...@...> wrote: > > --- In [email protected], "cyberscan" <kurt@> wrote: > > > > > > > > --- In [email protected], "bwolodko" <ben.wolodko@> wrote: > > > > > > --- In [email protected], "cyberscan" kurt@ wrote: > > > > > > > > Can someone help me configure an SD card to auto boot my NSbasic app > > on power up? I'm running WinCE 5.0. Thanks. > > > > > > > > > > Depending on the target device, place your NSBasic generated EXE file > > ( only one ) into a folder named AutoRun > > > > > > On the CuWin3500 the SD card is presented as > > > > > > Storage Card > > > > > > so if I place an EXE file ( only one ) in the > > > > > > Storage Card\Autorun > > > > > > folder, it will run upon booting as long as the Autorun dip switch is > > set to enable. > > > > > > Other hardware will have it's own protocols for Autorun > > > > > > On the CuWin3500 there is a dip switch that has to be set to enable > > the Autorun feature. > > > > > Thanks. When I try that, it comes up with an error "Cannot find > > NSBasic.exe. Please reinstall." Do I need to put NSBasic.exe somewhere? > > > > You have to install the NSBasic runtime onto the target device, the NSBasic > Installer should be doing this. > > > Typically the NSBasic Runtime is copied to the target into the > Flash Disk\Windows subdirectory, and then you have to "Save Registry" after > copying/installing to that location. > > I am currently using NSBasic 7.05c, not version 8.02. > > George may have to jump in here. > Thanks. Makes sense. How do I "save the registry?"
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "nsb-ce" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en -~----------~----~----~----~------~----~------~--~---
