Do not know why the Emails were not recived, no indication of undeliverable, but I will courier a CuWin5500 to you office on Tuesday, October 12th.
Thanks for your efforts Ben --- In [email protected], "George Henne" <g...@...> wrote: > > Hi Ben, > > I'm sorry - none of your emails came to our support email address. > > Our address is : > > NS BASIC Corporation > 71 Hill Crescent > Toronto, Canada M1M 1J3 > 416 264-5999 > > All of the major couriers deliver here regularly. > > George Henne > NS BASIC Corporation > http://www.nsbasic.com > > >Hi George, Thankyou for the offer. I have sent several emails to > >supp...@... without any replys. > > > >All I need is an address, and a choice of courier, and I will send you > a unit. > > > >Thanks again > > > >Ben > > > >--- In [email protected], "George Henne" <gh@> wrote: > >> > >> It sounds like you have done all the right things. > >> > >> Is there any chance you can loan us the device for a day? If so, contact > >> support @ nsbasic.com directly, and we will make the arrangements. > >> > >> George Henne > >> NS BASIC Corporation > >> http://www.nsbasic.com > >> > >> >I have purchased the latest CuWin5500, HMI device running Windows > >> Embedded 6.0 > >> > > >> >http://www.cubloc.com/product/06_02.php > >> > > >> >I have downloaded NSBasic 8.20a, using my Serial , updating from 7.05b > >> > > >> >Everything seems to install/load OK. No error messages > >> > > >> >on the NSBasic IDE choose Tools>Options>Installer>Get Device Info shows > >> > > >> >Device processor Type 2577: > >> >Device Type: SMDK2450 Board > >> >Device OEM Info: Samsung Electronics > >> >Device Version: 6 > >> > > >> >I have selected the Platform > >> > > >> >2577 - ARMV4/StrongARM/SA1100 > >> > > >> >Wanted to try running an NSBasic program, the Benchmark.nsb > >> > > >> >Active sync 4.5 connects, I am able to explore the CuWin5500, > >> > > >> >No error messages at all when uploading or running a program, > >> > > >> >but all I get is a Blank light gray screen, "X" in upper Right corner, a > >> >tab created on the bottom with the name of the program, plus the rest of > >> >the task bar icons , start button, etc. > >> > > >> >The unit is not lock up because I can open control panel etc. while the > >> >blank screen is being shown. > >> > > >> >The only screen item in the Benchmark.nsb program is a Message Box, but > >> >this does not show on the screen of the CuWin5500. > >> > > >> >I Have used NSBasic v 7.05b to program the CuWin3500, ab earlier version > >> >of the device, which has CE5.0 installed. Worked very well. > >> > > >> >In thinking about this, I concluded that the controls were not being > >> >registered. > >> >It would seem that Windows CE6.0 does not use "regsvrce.exe" to register > >> >the controls. > >> > > >> >I tried to run > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\MSCEComm.dll" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\MSCEComDlg.dll" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\MSCEFile.dll" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\NSCEPictureBox.ocx" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\newObjectsPack1.dll" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\NSBComDlg.dll" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\NSBControls.dll" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\SerialCE.dll" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> \DialogX.ocx" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\vbscript.dll" > >> > > >> >ShellExecute "open","regsvrce.exe","\Flash Disk\NSB BASIC\nsbasic > >> >\NSBWin32.dll" > >> > > >> >Bye > >> > > >> >Browsing the files on the CuWin5500, I did not find the file > >> >"regsvrce.exe" > >> > > >> >So I am at a bit of a loss, NSBasic 8.02a should not require an > >> >installed runtime on the device, and should have the ability to register > >> >any controls > >> > > >> >Any assistance is appreciated > >> > > >> >Ben > >> > > >> > > >> > > >> > > >> >------------------------------------ > >> > > >> >Yahoo! Groups Links > >> > > >> > > >> > > >> > > > > > > > > > >------------------------------------ > > > >Yahoo! Groups Links > > > > > > > -- You received this message because you are subscribed to the Google Groups "nsb-ce" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en.
