No I don't have AD I have a Windows NT 4.0 DOMAIN. I must not have explained myself very good so I will try again. When all the workstation are on one subnet Subnet A and all the Servers are on another Subnet Subnet B. I have problems with the workstations communicating with the Servers. They can't access the Domain Controller to verify there rights. But if I connect the two hubs together so they are all on the same subnet I have no problems. Wich means I am missing something in my router config. The router passes dhcp, and I can ping Computer names so dns is working. The problem I think is it is not able to connect to the domain controller on the other side of the router.
Hope this is clearer. Matt -----Original Message----- From: Leonard Lee [mailto:[EMAIL PROTECTED]] Sent: Thursday, March 28, 2002 1:09 PM To: NT 2000 Discussions Subject: RE: Windows 2000 routing I don't think there is anything wrong with the router. If there was then you should be experiencing the same problem with workstations in subnet B. If you are using Active Directory, then the problem could be there. I think the problem could be site related. (ie. move the workstation from the SubnetA site to the SubnetB site). Regards, Leonard > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Gerlak, Matthew > Sent: March 28, 2002 8:52 AM > To: NT 2000 Discussions > Subject: RE: Windows 2000 routing > > > > I have a lab in which I set up 2 Ethernet and 1 Token ring Subnet and > then connected them to a windows 2000 machine which I am using to > route between > the subnets. Now for example I have Subnet A which is the > subnet all servers > sit on DhCp and sms servers domain controllers. Subnet B which is all > workstations. When a machine on Subnet B has windows 98,2000 or NT. It > connects to machines on subnet A ok gets dhcp address from > subnet A and is > able to map a drive to the images share on a server on subnet > A. Now using > the same user id and password. I boot a machine up on subnet > B with a boot > disk to load a image from subnet A. I get a dhcp address but > I get a error > 53 cant find computer name in path when trying to map a drive > to a server on > Subnet A. now if I move the workstation from subnet B to > subnet A it works > Fine. So I think the router is not forwarding everything. > > Any one have any ideas. One want or how to fix this > > Matt > > ------ > You are subscribed as [EMAIL PROTECTED] > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe send a blank email to %%email.unsub%% > ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [email protected] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED]
