Only 5 machines have internet connections. I know for sure that there are many IP subnets installed by some 'smart users' but I don't know witch ones they are using.
Filipe Joel de Almeida Network Consultant [EMAIL PROTECTED] Mobile: +351 967819600 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Muqeem Syed Sent: s�bado, 20 de Abril de 2002 21:40 To: NT 2000 Discussions Subject: RE: Network discovery there are tools that will help u to do this as well.... all u have to do is install this sniffer softwares and sniff packets for mac addresses,.. and also u stilll havent informed if u r company uses any form of connectivity to the internet... if they do .. then there is a router that all the machines will need as a gateway .. which will tell u that there are some machines for that specific subnet... and then u do a ping sweep for that subnet -----Original Message----- From: Filipe Joel de Almeida [mailto:[EMAIL PROTECTED]] Sent: Saturday, April 20, 2002 10:55 PM To: NT 2000 Discussions Subject: RE: Network discovery Just to give you some additional info on this: - The network is made up of only Hubs, so there's no switch to get the MAC addresses info from. - I can't know how many machines are connected to the network because there are several 'self-implemented' "departmental networks" because some users just decided to get a hub, and use it to connect several machines to the main network. This is a crapy network, with ~100 machines, and no organization. I have to try to solve the most critical problems, and then build a real network step by step, but I can't start my job because the guy that pays the bills decided that the first thing to be done is find out ALL the machines that are connected to the network. I thought there could be a tool to find out what are the MAC addresses from all the machines currently connected to a LAN, and then, from that list of MAC addresses try to find out what's the IP of each machine. I know there might be some machines that aren't running TCP/IP, but I'll have to consider those as marginal cases. All help is welcome. Filipe Joel de Almeida -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Filipe Joel de Almeida Sent: s�bado, 20 de Abril de 2002 20:38 To: NT 2000 Discussions Subject: Network discovery Dear network gurus, � My boss wants me to be able to find out all the machines that are connected to our LAN, even if they are using a different IP range than our official one. Is there any way to achieve this? � Thanks in advance, � Filipe Joel de Almeida � ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [email protected] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED]
