I actually had to back out to version 2.1.x - i notice that after a period of about 30-60 minutes, 2.2 will just *hang* and i have to sig9 it to stop it at all... very irritating...
the SFLOW stuff seems to work pretty well, when ntop itself is behaving properly. --- "Burton M. Strauss III" <[EMAIL PROTECTED]> wrote: > The state is saved immediately in the prefs db as it's being > processed. You > can run strings on it then grep -i sflow and see what's set. > > # strings /usr/share/ntop/prefsCache.db | grep -i sflow > > although you'll have to manually poke at that - maybe put it into a > file and > add line breaks... > > > Post the startup messages from the log. > > > When you make the changes, re-enter the plugins page (knock down the > browser, restart it, admin | plugins) and see if there's a red > message on > sFlow, or if it's listed then as active (could be a cached page, > although > that piece isn't supposed to, some proxies think they're smarter than > the > instructions in the html text). > > > There's not been a lot of feedback about sFlow, so I'm not aware of > any > users out there... gang? > > > -----Burton > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of > Scott > Stone > Sent: Tuesday, June 03, 2003 5:02 PM > To: [EMAIL PROTECTED] > Subject: [Ntop] problem with ntop not closing correctly or saving > plugin > config state > > > ... otherwise everything works fine.... :) problem report follows: > > ---------------------------------------------------------------------------- > --- > n t o p v e r s i o n '2.2' p r o b l e m r e p o r t > > From: ___Scott Stone___________________________ > > EMail: [EMAIL PROTECTED] > > Date: 2003-06-03 21:45:41 GMT > > ---------------------------------------------------------------------------- > --- > Summary > > > > > > OS: _Linux_________ version: __SuSE 8.1________ > > ntop from: ____source__________________________ (rpm, source, ports, > etc.) > > Hardware: CPU: _i686____ (i86, SPARC, etc.) > # Processors: __1___ > Memory: __1024___ MB > Network: > Network Interface 0 eth0 > Ethernet: 9763 > Broadcast: 226 > Multicast: 865 > IP: 9126 > Mfg: ____________________ Model: ____________________ > NIC Speed: 10/*100*/1000/Other Bus: *PCI* ISA USB Firewire > Other > Location: Public Internet / LAN / WAN > Bandwidth: Dialup DSL/CableModem fT1 T1 10Mbps T3 > 100Mbps+ > # Hosts (machines): __________ > > Network Interface 1 sFlow-device > Ethernet: 12149 > Broadcast: 14 > Multicast: 22 > IP: 12126 > Mfg: ____________________ Model: ____________________ > NIC Speed: 10/100/1000/Other Bus: PCI ISA USB Firewire > Other > Location: Public Internet / LAN / WAN > Bandwidth: Dialup DSL/CableModem fT1 T1 10Mbps T3 > 100Mbps+ > # Hosts (machines): __________ > > ---------------------------------------------------------------------------- > --- > Log extract > > > > > > ---------------------------------------------------------------------------- > --- > Problem Description > > > When I click ADMIN, I enable all the sFlow stuff... it never lists > the > plugin as 'active' > even though it appears to collect data properly. However, when I > shut > down ntop, > if I restart it I have to re-enter all this information - is it not > supposed to be > saved between restarts? > > Also, when I try to shut down ntop, it unloads the plugins and > *hangs* > and must be > killed with a SIGKILL (signal 9). Hm, these problems might be > related. > > Let me know if you need further output, ie, an strace or whatnot. > > I tried searching through the pipermail archives but came up empty. > > Great tool, though, and I do have workarounds for these annoyances.. > but would be > great if I could solve them. > > > > > > > ---------------------------------------------------------------------------- > --- > > ntop version.....2.2 > Built on.....06/03/03 02:09:30 PM > OS.....i686-pc-linux-gnu > Process Id.....21090 > > > Command line > > Started as..../usr/local/ntop/bin/ntop -C -u wwwrun -w 3000 -E > > Resolved to..../usr/local/ntop/bin/ntop > -C > -u > wwwrun > -w > 3000 > -E > > > Command line parameters are: > > -a | --access-log-path.....(default) (nil) > -b | --disable-decoders.....(default) No > -c | --sticky-hosts.....(default) No > -d | --daemon.....No > -e | --max-table-rows.....(default) 128 > -f | --traffic-dump-file.....(default) (nil) > -g | --track-local-hosts.....(default) Track all hosts > -o | --no-mac.....(default) Trust MAC Addresses > -i | --interface (effective).....eth0 > -k | --filter-expression-in-extra-frame.....(default) No > -l | --pcap-log.....(default) (nil) > -m | --local-subnets (effective)..... > -n | --numeric-ip-addresses.....(default) No > -p | --protocols.....(default) internal list > -q | --create-suspicious-packets.....(default) Disabled > -r | --refresh-time.....(default) 120 > -s | --no-promiscuous.....(default) No > -t | --trace-level.....(default) 3 > -u | --user.....wwwrun (uid=30, gid=65534) > -w | --http-server.....(default) Active, all interfaces, port 3000 > -z | --disable-sessions.....(default) No > -B | --filter-expression.....(default) none > -D | --domain.....palmsource.com > -E | --enable-external-tools.....Yes > -F | --flow-spec.....(default) none > -K | --enable-debug.....(default) No > -L | --use-syslog.....No > -M | --no-interface-merge (effective).....(parameter -M set, > Interfaces separate) No > -O | --pcap-file-path.....(default) /usr/local/ntop/var/ntop > -P | --db-file-path.....(default) /usr/local/ntop/var/ntop > -U | --mapper.....(default) (nil) > -W | --https-server.....Uninitialized > --throughput-chart-type.....(default) Area > --ignore-sigpipe.....(default) No > --ssl-watchdog.....(default) No > --dynamic-purge-limits.....(default) No > --reuse-rrd-graphics.....(default) No > --p3p-cp.....(default) none > --p3p-uri.....(default) none > --disable-stopcap.....(default) No > > > Note: (effective) means that this is the value after ntop has > processed the parameter. > (default) means this is the default value, usually (but not always) > set by a #define in globals-defines.h. > > > > Run time/Internal > > External tool: lsof.....Not found on system OR unable to run suid > root > Web server URL.....http://any:3000 > SSL Web server (https://).....Not Active > GDBM version.....This is GDBM version 1.8.0, as of May 19, 1999. > OpenSSL Version.....OpenSSL 0.9.6j 10 Apr 2003 > zlib version.....1.1.4 > Protocol Decoders.....Enabled > Fragment Handling.....Enabled > Tracking only local hosts.....No > # IP Protocols Being Monitored.....18 > # Protocol slots.....15042 > # IP Ports Being Monitored.....58 > # Ports slots.....116 > # Handled SIGPIPE Errors.....0 > # Handled HTTP Requests.....122 > Devices (Network Interfaces).....2 > Domain name (short).....com > IP to country flag table (entries).....47455 > Total Hash Collisions (Vendor/Special) (lookup).....0 > Local Networks.....192.168.101.0/255.255.255.0 [device eth0] > 192.168.101.36/255.255.255.0 [device sFlow-device] > > > Memory allocation - data segment > > arena limit, getrlimit(RLIMIT_DATA, ...).....-1 > Allocated blocks (ordblks).....17 > Allocated (arena).....6817528 > Used (uordblks).....6807568 > Free (fordblks).....9960 > > > Memory allocation - mmapped > > Allocated blocks (hblks).....6 > Allocated bytes (hblkhd).....3084288 > > > Memory Usage > > IPX/SAP Hash Size (bytes).....1897 > IP to country flag table (bytes).....1454304 (1.4 MB) > Bytes per entry.....30.6 > Current memory usage.....9901816 > Base memory usage.....5940984 > Hosts stored (active+cache).....788 = (788 + 0) > (very) Approximate memory per host.....5.0KB > > > Host Memory Cache > > Limit.....#define MAX_HOSTS_CACHE_LEN 512 > Current Size.....0 > Maximum Size.....4 > # Entries Reused.....6 > > > MAC/IPX Hash tables > > IPX/SAP Hash Size (entries).....179 > IPX/SAP Hash Collisions (load).....0 > IPX/SAP Hash Collisions (use).....0 > > > Packet queue > > Queued to Process.....0 > Maximum queue.....9 > > > Host/Session counts - global > > Purge idle hosts.....Enabled > Purged hosts.....6 > Maximum hosts to purge per cycle.....512 > DEFAULT_MAXIMUM_HOSTS_PURGE_PER_CYCLE.....512 > Terminated Sessions.....349 > > Host/Session counts - Device 0 (eth0) > Actual Hash Size.....512 > Stored hosts.....30 [5 %] > Sessions.....5 > Max Num. Sessions.....79 > > Host/Session counts - Device 1 (sFlow-device) > Actual Hash Size.....1024 > Stored hosts.....758 [74 %] > Sessions.....0 > Max Num. Sessions.....0 > > > Address Resolution > > DNS sniffed: > > DNS Packets sniffed.....1607 > less 'requests'.....806 > less 'failed'.....320 > less 'reverse dns' (in-addr.arpa).....470 > DNS Packets processed.....11 > Stored in cache (includes aliases).....4 > > > IP to name - ipaddr2str(): > > Total calls.....747 > ....OK.....19 > ....Total not found.....728 > ........Not found in cache.....728 > ........Too old in cache.....0 > > > Queued - dequeueAddress(): > > Total Queued.....728 > Not queued (duplicate).....0 > Maximum Queued.....82 > Current Queue.....3 > > > Resolved - resolveAddress(): > > Addresses to resolve.....726 > ....less 'Error: No cache database'.....0 > ....less 'Found in ntop cache'.....0 > Gives: # gethost (DNS lookup) calls.....726 > > > DNS lookup calls: > > DNS resolution attempts.....726 > ....Success: Resolved.....465 > ....Failed.....260 > ........HOST_NOT_FOUND.....241 > ........NO_DATA.....0 > ........NO_RECOVERY.....0 > ........TRY_AGAIN (don't store).....19 > ........Other error (don't store).....0 > DNS lookups stored in cache.....706 > Host addresses kept numeric.....260 > > > Vendor Lookup Table > > Input lines read.....131 > Records added total.....121 > .....includes special records.....59 > getVendorInfo() calls.....60 > getSpecialVendorInfo() calls.....56 > Found 48bit (xx:xx:xx:xx:xx:xx) match.....2 > Found 24bit (xx:xx:xx) match.....10 > Found multicast bit set.....28 > Found LAA (Locally assigned address) bit set.....0 > > > Thread counts > > Active.....7 > Dequeue.....1 > Children (active).....0 > > Reject duration (seconds).....300 > It is now.....Tue Jun 3 14:45:41 2003 > Directory (search) order > > Data Files......<br>/usr/local/ntop/share/ntop<br> > Config Files......<br>/usr/local/ntop/etc/ntop<br>/etc<br> > Plugins....../plugins<br>/usr/local/ntop/lib/ntop/plugins<br> > > > Compile Time: ./configure > > ./configure parameters.....--prefix=/usr/local/ntop > --with-rrd-root=/usr/local/rrdtool-1.0.42 > Built on (Host).....i686-pc-linux-gnu > Built for (Target).....i686-pc-linux-gnu > compiler (cflags).....gcc -DLINUX -g -O2 -Wshadow -Wpointer-arith > -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fPIC > -DHAVE_CONFIG_H > include path.....-I/usr/src/ntop-2.2/gdchart0.94c/zlib-1.1.4 > -I/usr/src/ntop-2.2/gdchart0.94c > -I/usr/src/ntop-2.2/gdchart0.94c/gd-1.8.3 > -I/usr/src/ntop-2.2/gdchart0.94c/gd-1.8.3/libpng-1.2.4 > -I/usr/local/rrdtool-1.0.42/include > system libraries.....-lpthread -lresolv -lnsl -lssl -lcrypto -lpcap > -lgdbm -ldl -lcrypt -lc -L/usr/src/ntop-2.2/gdchart0.94c/zlib-1.1.4 > -lz > -L/usr/src/ntop-2.2/gdchart0.94c -lgdchart > -L/usr/src/ntop-2.2/gdchart0.94c/gd-1.8.3 -lgd > -L/usr/src/ntop-2.2/gdchart0.94c/gd-1.8.3/libpng-1.2.4 -lpng > -L/usr/local/rrdtool-1.0.42/lib -lrrd > install path...../usr/local/ntop > GNU C (gcc) version.....3.2 (3.2.0) > > > Internationalization (i18n) > > i18n enabled.....No > > > Compile Time: Debug settings in globals-defines.h > > DEBUG.....no > ADDRESS_DEBUG.....no > DNS_DEBUG.....no > DNS_SNIFF_DEBUG.....no > FTP_DEBUG.....no > GDBM_DEBUG.....no > HASH_DEBUG.....no > HOST_FREE_DEBUG.....no > HTTP_DEBUG.....no > IDLE_PURGE_DEBUG.....no > MEMORY_DEBUG.....no > NETFLOW_DEBUG.....no > SEMAPHORE_DEBUG.....no > SESSION_TRACE_DEBUG.....no > SSLWATCHDOG_DEBUG.....no > STORAGE_DEBUG.....no > UNKNOWN_PACKET_DEBUG.....no > > > Compile Time: globals-define.h > > PARM_PRINT_ALL_SESSIONS.....no > PARM_PRINT_RETRANSMISSION_DATA.....no > PARM_FORK_CHILD_PROCESS.....yes (normal) > CGI Scripts.....globals-defines.h: #define PARM_USE_CGI > Alternate row colors.....globals-defines.h: /* #define PARM_USE_COLOR > */ > Buggy gethostbyaddr() - use alternate > implementation.....globals-defines.h: /* #define PARM_USE_HOST */ > MAKE_ASYNC_ADDRESS_RESOLUTION.....yes > MAKE_WITH_SSLWATCHDOG.....yes > MAKE_WITH_SSLWATCHDOG_RUNTIME (derived).....yes > Bad IP Address table size.....globals-defines.h: #define > MAX_NUM_BAD_IP_ADDRESSES 3 > Minimum refresh interval (seconds).....#define > PARM_MIN_WEBPAGE_AUTOREFRESH_TIME 15 > Maximum # of Protocols to show in graphs.....#define MAX_NUM_PROTOS > 64 > Maximum # of routers (Local Subnet Routers report).....#define > MAX_NUM_ROUTERS 512 > Maximum # of network interface devices.....#define MAX_NUM_DEVICES 32 > Maximum # of processes for lsof report.....#define > MAX_NUM_PROCESSES_READLSOFINFO 1024 > Maximum network size (hosts per interface).....#define > MAX_SUBNET_HOSTS > 1024 > Allocated # of passive FTP sessions.....#define > MAX_PASSIVE_FTP_SESSION_TRACKER 384 > Inactive passive FTP session timeout (seconds).....#define > PARM_PASSIVE_SESSION_MINIMUM_IDLE 60 > > > Compile Time: Hash Table Sizes > > Initial size.....#define CONST_HASH_INITIAL_SIZE 32 > After 1st extend.....#define CONST_HASH_MINIMUM_SIZE 512 > Intermediate increase factor.....#define CONST_HASH_INCREASE_FACTOR 2 > Factor growth until.....#define CONST_HASH_FACTOR_MAXIMUM 4096 > Then grow (linearly) by.....#define CONST_HASH_TERMINAL_INCREASE 4096 > > > Compile Time: globals-define.h > > Chart Format.....globals-report.h: #define CHART_FORMAT ".png" > > > Compile Time: config.h > > CFG_ETHER_HEADER_HAS_EA.....no > CFG_MULTITHREADED.....yes > HAVE_ALARM.....yes > HAVE_ALLOCA.....yes > HAVE_ALLOCA_H.....yes > HAVE_ARPA_NAMESER_H.....yes > HAVE_BACKTRACE.....yes > HAVE_BZERO.....yes > HAVE_CTIME_R.....yes > HAVE_CURSES_H.....no > HAVE_DLFCN_H.....yes > HAVE_DL_H.....no > HAVE_DOPRNT.....no > HAVE_ENDPWENT.....yes > HAVE_ERRNO_H.....yes > HAVE_FACILITYNAMES.....yes > HAVE_FCNTL_H.....yes > HAVE_FORK.....yes > HAVE_GDBM_H.....yes > HAVE_GDCPIE_H.....yes > HAVE_GD_H.....yes > HAVE_GDOME_H.....no > HAVE_GETHOSTBYADDR.....yes > HAVE_GETHOSTBYADDR_R.....yes > HAVE_GETHOSTBYNAME.....yes > HAVE_GETHOSTNAME.....yes > HAVE_GETIPNODEBYADDR.....no > HAVE_GETPASS.....yes > HAVE_GETTIMEOFDAY.....yes > HAVE_GLIBCONFIG_H.....no > HAVE_GLIB_H.....no > HAVE_IF_H.....no > HAVE_IN6_ADDR.....yes > HAVE_INT16_T.....yes > HAVE_INT32_T.....yes > HAVE_INT64_T.....yes > HAVE_INT8_T.....yes > HAVE_INTTYPES_H.....yes > HAVE_LANGINFO_H.....yes > HAVE_LIBC.....yes > HAVE_LIBCRYPT.....yes > HAVE_LIBCRYPTO.....yes > HAVE_LIBDL.....yes > HAVE_LIBDLD.....no > HAVE_LIBGD.....yes > HAVE_LIBGDBM.....yes > HAVE_LIBGDOME.....no > HAVE_LIBGLIB.....no > HAVE_LIBM.....no > HAVE_LIBNSL.....yes > HAVE_LIBPCAP.....yes > HAVE_LIBPNG.....yes > HAVE_LIBPOSIX4.....no > HAVE_LIBPTHREAD.....yes > HAVE_LIBPTHREADS.....no > HAVE_LIBRESOLV.....yes > HAVE_LIBRT.....no > HAVE_LIBSOCKET.....no > HAVE_LIBSSL.....yes > HAVE_LIBWRAP.....no > HAVE_LIBXML2.....no > HAVE_LIBZ.....yes > HAVE_LIMITS_H.....yes > HAVE_LOCALE_H.....yes > HAVE_LOCALTIME_R.....yes > HAVE_LONG_DOUBLE.....yes > HAVE_MATH_H.....yes > HAVE_MEMCHR.....yes > HAVE_MEMORY_H.....yes > HAVE_MEMSET.....yes > HAVE_NCURSES_H.....no > HAVE_NDIR_H.....no > HAVE_NETDB_H.....yes > HAVE_OPENSSL.....yes > HAVE_OPENSSL_CRYPTO_H.....yes > HAVE_OPENSSL_ERR_H.....yes > HAVE_OPENSSL_PEM_H.....yes > HAVE_OPENSSL_RSA_H.....yes > HAVE_OPENSSL_SSL_H.....yes > HAVE_OPENSSL_X509_H.....yes > HAVE_PCAP_FREECODE.....yes > HAVE_PCAP_H.....yes > HAVE_PCAP_OPEN_DEAD.....yes > HAVE_PNG_H.....yes > HAVE_PTHREAD_H.....yes > HAVE_PUTENV.....yes > HAVE_PWD_H.....yes > HAVE_READLINE.....no > HAVE_READLINE_READLINE_H.....no > HAVE_RE_COMP.....yes > HAVE_REGCOMP.....yes > HAVE_REGEX.....yes > HAVE_RRD.....yes > HAVE_RRD_H.....yes > HAVE_SCHED_H.....yes > HAVE_SCHED_YIELD.....yes > HAVE_SECURITY_PAM_APPL_H.....yes > HAVE_SELECT.....yes > HAVE_SEMAPHORE_H.....yes > HAVE_SETJMP_H.....yes > HAVE_SHADOW_H.....yes > HAVE_SIGNAL_H.....yes > HAVE_SNPRINTF.....yes > HAVE_SOCKET.....yes > HAVE_SQRT.....yes > HAVE_STDARG_H.....yes > HAVE_STDIO_H.....yes > HAVE_STDLIB_H.....yes > HAVE_STRCASECMP.....yes > HAVE_STRCHR.....yes > HAVE_STRCSPN.....yes > HAVE_STRDUP.....yes > HAVE_STRERROR.....yes > HAVE_STRFTIME.....yes > HAVE_STRING_H.....yes > HAVE_STRINGS_H.....yes > HAVE_STRNCASECMP.....yes > HAVE_STRPBRK.....yes > HAVE_STRRCHR.....yes > HAVE_STRSPN.....yes > HAVE_STRSTR.....yes > HAVE_STRTOK_R.....yes > HAVE_STRTOUL.....yes > HAVE_SYS_DIR_H.....no > HAVE_SYS_IOCTL_H.....yes > HAVE_SYS_LDR_H.....no > HAVE_SYS_NDIR_H.....no > HAVE_SYS_RESOURCE_H.....yes > HAVE_SYS_SCHED_H.....no > HAVE_SYS_SOCKIO_H.....no > HAVE_SYS_TIME_H.....yes > HAVE_SYS_TYPES_H.....yes > HAVE_SYS_UN_H.....yes > HAVE_TCPD_H.....yes > HAVE_TM_ZONE.....yes > HAVE_TZNAME.....no > HAVE_U_INT16_T.....yes > HAVE_U_INT32_T.....yes > HAVE_U_INT64_T.....yes > HAVE_UINT64_T.....no > HAVE_U_INT8_T.....yes > HAVE_UNAME.....yes > HAVE_UNISTD_H.....yes > HAVE_VFORK.....yes > HAVE_VFORK_H.....no > HAVE_VPRINTF.....yes > HAVE_WORKING_FORK.....yes > HAVE_WORKING_VFORK.....yes > HAVE_ZLIB_H.....yes > MAKE_MICRO_NTOP.....no > MAKE_WITH_FTPDATA_ASSUMED.....no > MAKE_WITH_GDCHART.....yes > MAKE_WITH_I18N.....no > MAKE_WITH_IGNORE_SIGPIPE.....no > MAKE_WITH_LARGERRDPOP.....no > MAKE_WITH_SSLV3_SUPPORT.....no > MAKE_WITH_SSLWATCHDOG_COMPILETIME.....no > MAKE_WITH_ZLIB.....yes > __PROTOTYPES.....yes > PROTOTYPES.....yes > SETVBUF_REVERSED.....no > TIME_WITH_SYS_TIME.....yes > TM_IN_SYS_TIME.....no > CFG_CONFIGFILE_DIR - config file > directory...../usr/local/ntop/etc/ntop > CFG_DATAFILE_DIR - data file directory...../usr/local/ntop/share/ntop > CFG_DBFILE_DIR - database file directory...../usr/local/ntop/var/ntop > CFG_PLUGIN_DIR - plugin file > directory...../usr/local/ntop/lib/ntop/plugins > CFG_RUN_DIR - run file directory...../usr/local/ntop/var/ntop > CFG_NEED_GETDOMAINNAME (getdomainname(2) function).....yes > CFG_xxxxxx_ENDIAN (Hardware Endian).....little > > > Compile Time: globals-defines.h > > EMSGSIZE.....90 > ETHERMTU.....1500 > LEN_CMDLINE_BUFFER.....4096 > LEN_FGETS_BUFFER.....512 > LEN_GENERAL_WORK_BUFFER.....1024 > LEN_MEDIUM_WORK_BUFFER.....64 > LEN_SMALL_WORK_BUFFER.....16 > LEN_TIME_STAMP_BUFFER.....2 > MAKE_NTOP_PACKETSZ_DECLARATIONS.....no > MAKE_RMON_SUPPORT.....yes > MAKE_WITH_FORK_COPYONWRITE.....yes > MAKE_WITH_HTTPSIGTRAP.....no > MAKE_WITH_RRDSIGTRAP.....no > MAKE_WITH_SCHED_YIELD.....yes > MAKE_WITH_SEMAPHORES.....yes > MAKE_WITH_SYSLOG.....yes > MAKE_WITH_XMLDUMP.....no > MAX_ADDRESSES.....35 > MAX_ALIASES.....35 > MAX_ASSIGNED_IP_PORTS.....1024 > MAXCDNAME.....255 > MAX_DEVICE_NAME_LEN.....64 > MAXDNAME.....1025 > MAX_HASHDUMP_ENTRY.....65535 > MAXHOSTNAMELEN.....64 > MAX_HOSTS_CACHE_LEN.....512 > MAX_IP_PORT.....65534 > MAX_IPXSAP_NAME_HASH.....179 > MAXLABEL.....63 > MAX_LANGUAGES_REQUESTED.....4 > MAX_LANGUAGES_SUPPORTED.....8 > MAX_LASTSEEN_TABLE_SIZE.....4096 > MAX_LEN_VENDOR_NAME.....64 > MAX_NFS_NAME_HASH.....12288 > MAX_NODE_TYPES.....8 > MAX_NUM_BAD_IP_ADDRESSES.....3 > MAX_NUM_CONTACTED_PEERS.....8 > MAX_NUM_DEQUEUE_THREADS.....yes > MAX_NUM_DEVICES.....32 > MAX_NUM_DHCP_MSG.....8 > MAX_NUM_FIN.....4 > MAX_NUM_IGNOREDFLOWS.....32 > MAX_NUM_NETWORKS.....32 > MAX_NUM_PROBES.....16 > MAX_NUM_PROCESSES_READLSOFINFO.....1024 > MAX_NUM_PROTOS.....64 > MAX_NUM_PROTOS_SCREENS.....5 > MAX_NUM_ROUTERS.....512 > MAX_NUM_STORED_FLAGS.....4 > MAX_PASSIVE_FTP_SESSION_TRACKER.....384 > MAX_PER_DEVICE_HASH_LIST.....65535 > MAX_SESSIONS_CACHE_LEN.....512 > MAX_SSL_CONNECTIONS.....32 > NAME_MAX.....255 > NETDB_SUCCESS.....0 > NS_CMPRSFLGS.....192 > NS_MAXCDNAME.....255 > PACKETSZ.....512 > PARM_ENABLE_EXPERIMENTAL.....no > PARM_FORK_CHILD_PROCESS.....yes > PARM_MIN_WEBPAGE_AUTOREFRESH_TIME.....15 > PARM_PASSIVE_SESSION_MINIMUM_IDLE.....60 > PARM_PIPE_READ_TIMEOUT.....15 > PARM_SESSION_PURGE_MINIMUM_IDLE.....600 > PARM_SHOW_NTOP_HEARTBEAT.....no > PARM_SSLWATCHDOG_WAITWOKE_LIMIT.....5 > PARM_USE_CGI.....yes > PARM_USE_COLOR.....no > PARM_USE_HOST.....no > PARM_USE_MACHASH_INVERT.....yes > PARM_USE_SESSIONS_CACHE.....no > PARM_WEDONTWANTTOTALKWITHYOU_INTERVAL.....300 > SLL_HDR_LEN.....16 > THREAD_MODE.....MT (SSL) > > > > ---------------------------------------------------------------------------- > --- > Note: The generated id below should be unique. It's essentially a > random 6 or 7 > character tracking tag for each problem report. Since it's > generated on > your machine, we can't just use an ever increasing global > number. > > While it should be unique, it is not traceable back to a > specific > user or > machine. If it makes you uncomfortable just delete it. > > Problem Report Id: PR_PYR6EVB > > ---------------------------------------------------------------------------- > --- > > > ===== > ------------------- > Scott M. Stone <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]> > Taos - The SysAdmin Company (http://www.taos.com) > Cisco Certified Network Associate > Sun Solaris Certified Systems Administrator > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://listgateway.unipi.it/mailman/listinfo/ntop > > _______________________________________________ > Ntop mailing list > [EMAIL PROTECTED] > http://listgateway.unipi.it/mailman/listinfo/ntop ===== ------------------- Scott M. Stone <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]> Taos - The SysAdmin Company (http://www.taos.com) Cisco Certified Network Associate Sun Solaris Certified Systems Administrator _______________________________________________ Ntop mailing list [EMAIL PROTECTED] http://listgateway.unipi.it/mailman/listinfo/ntop
