Currently I am monitoring both interfaces, internal as well es external. The behaviour noted below occurs on the internal interface eth0. I have also tried eth1 but this only shows hosts outside the LAN and the actual "localhost" (the firewall). I have uploaded a snapshot of the local to remote overview here http://utopia4.de/tmp/ntop/ for clarification.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Noyes, Christopher A. Sent: Thursday, July 05, 2007 12:45 PM To: '[email protected]' Subject: RE: [Ntop] ntop and NAT Which interface are you monitoring traffic on? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Daniel Arnold Sent: Thursday, July 05, 2007 3:38 AM To: [email protected] Subject: [Ntop] ntop and NAT Hi, I have ntop running on a linux box which is a NAT router for our local network. This is running fine, so far, but I noticed one annoying issue: Any host on the LAN is named "localhost". The links refer to the correct IP address but it is impossible to get a quick overview of the network load / traffic when every host is called "localhost". Is there any way to get around this? Thanks in advance, Daniel _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
