OK, I have disabled my second NIC and only running on one now. Same problem. Most of the pages are blank and just says Done on the bottom after loading page.
Duane On Jan 16, 2008 6:50 PM, Kurt Buff <[EMAIL PROTECTED]> wrote: > On Jan 16, 2008 2:05 PM, Duane Morris <[EMAIL PROTECTED]> wrote: > > Running on CentOS 5. I have two nics on the same network, eth0 with an > IP > > address plugged in network switch and eth1 without IP address plugged > into > > hub sitting between switch and firewall. I'm running ntop against eth1, > > it's getting traffic, but when I click summary, then hosts I get an > empty > > page. Summary Traffic, Network Flows all work. Under All protocals all > > selections are empty. > > > > Missing something??? Why are the pages empty except for Summary > Traffic. > > > > ntop -i eth1 -u root -d > > > > Thanks > > I'm running two NICs also, but under FreeBSD and in a slightly > different configuration. I have the numbered NIC on one subnet, and > the unnumbered NIC on a mirror port in a separate switch in a subnet > between the firewall and our backbone switch. If it helps, here's a > snippet from my /etc/rc.conf file. Note that rl0 is a Realtek NIC, and > that fxp0 is an Intel NIC. > > ifconfig_rl0="inet 192.168.24.239 netmask 255.255.255.0" > ifconfig_fxp0="up" > ntop_enable="YES" > ntop_flags="-d -u ntop -P /home/ntop/databases -K -L -t 4 -o -i fxp0 > -w 192.168.24.239:3000 -W 0 -D zetron.com -L" > > I have to wonder if you've told ntop to monitor the unnumbered NIC > (the -i parameter) > > Kurt > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop >
_______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
