I found 'Microsoft DirectAccess Best Practices and Troubleshooting' by Jordan Krause (also from Packt Publishing) to be a bit more DirectAccess focused and easier to follow. Has some good 'from the field' hints and tips in there.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Melvin Backus Sent: 21 July 2014 20:10 To: [email protected] Subject: RE: [NTSysADM] MS DirectAccess That really only dealt with DA based on the UAG which is much easier than without UAG, but still more complex than the URA replacement available in 2012. Try this one instead. Same author and publisher, different target and coverage. Windows Server 2012 Unified Remote Access Planning and Deployment -- There are 10 kinds of people in the world... those who understand binary and those who don't. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kurt Buff Sent: Monday, July 21, 2014 2:55 PM To: [email protected] Subject: Re: [NTSysADM] MS DirectAccess Do tell... I have "Microsoft Forefront UAG 2010 Administrator's Handbook" by Ben-Ari and Dolev (PACKT), and didn't find it especially useful. I relied much more on MSFT documents, other blogs, and asking questions in various places to make it go. Kurt On Mon, Jul 21, 2014 at 10:13 AM, Melvin Backus <[email protected]> wrote: > If I’m not mistaken the extra infrastructure is still required if you > need to support Win7 clients. I can also recommend an excellent book > on the topic if you’re interested. > > > > -- > There are 10 kinds of people in the world... > those who understand binary and those who don't. > > > > From: [email protected] > [mailto:[email protected]] > On Behalf Of Nash Pherson > Sent: Monday, July 21, 2014 1:01 PM > To: [email protected] > Subject: RE: [NTSysADM] MS DirectAccess > > > > Use Server 2012 R2. Server 2008 R2 requires significantly more > infrastructure to accomplish the same things. > > > > > > From: [email protected] > [mailto:[email protected]] > On Behalf Of Todd Lemmiksoo > Sent: Monday, July 21, 2014 11:36 AM > To: [email protected] > Subject: [NTSysADM] MS DirectAccess > > > > I have been asked to look into setting up MS Direct Access. To those > that have set this up and are using it are you Server 2008R2 or Server 2012R2. > Any issues. > > > -- > T. Todd Lemmiksoo === STEMCOR CONFIDENTIALITY AND DISCLAIMER NOTICE This e-mail is intended only for the addressees named in it. The contents should not be disclosed to any other person nor copies taken. Any views or opinions presented are solely those of the sender and do not necessarily represent those of Stemcor unless otherwise specifically stated. Stemcor does not accept legal responsibility for the contents of this message nor responsibility for any change made to it after it was sent by the original sender. You are advised to carry out a virus check before opening any attachment as Stemcor does not accept liability for any damage sustained as a result of any software viruses. You should be aware that Stemcor reserves the right to read incoming and outgoing emails. === --------------------------------------------------------------------------------------- This email has been scanned for email related threats and delivered safely by Mimecast. For more information please visit http://www.mimecast.com ---------------------------------------------------------------------------------------
